Snakesms
-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Snakesms
-
-
3 minutes ago, yayitazale said:
You are using a old template, the error comes because you have separate folder mappings for clips and recordings media. You have to remove the container and use the new template just installing the app again.
The only mapping you need for media is "/media/frigate"
This a the same issue reported on github:
https://github.com/blakeblackshear/frigate/issues/1936
As you can see on the template the only mapping for media is "/media/frigate":
https://github.com/yayitazale/unraid-templates/blob/main/yayitazale/frigate-amd64.xml
Thank you, will try to update template, I didn't know there is new version exist
-
10 hours ago, nau said:
i've added this to config and it started sucessfully
database: path: /media/frigate/clips/frigate.db
Thank you, it helps me as well
-
8 hours ago, yayitazale said:
This is not needed If you don't have changed the Database from the original location.
I didn't change anything at all in the original template, but as you can see its failing.
I can confirm that the real database location is here:
/media/frigate/clips/frigate.dband '/media/frigate/frigate.db' does not exist
-
I've upgraded from the latest release 0.8.4 to 0.9.1 and made required config changes, so that part was processed well according to the log, however every time I do call Frigate to start it fails with an error in the log:
frigate Invalid cross-device link: '/media/frigate/clips/frigate.db' -> '/media/frigate/frigate.db'Any ideas why need to be changed or why its complaining in all 0.9.X versions, but does work fine with the version 0.8.4
Thank you in advance
-
2 minutes ago, Squid said:
Don't know if this is applicable to you or not, but I had a pair of LSI controllers, and both were only visible when installed in a specific order in the slots. If I reversed them, one wouldn't work.
Thanks, I'll try to swap them around, even though my problem is with HP one not an LSI controller.
Just to clarify: when they were "in the wrong slots" in your case, they were not visible even in the BIOS or only in Unraid as in my case?
-
5 minutes ago, Squid said:
Is it this card:
03:00.0 RAID bus controller [0104]: Hewlett-Packard Company Smart Array Gen8 Controllers [103c:323b] (rev 01) DeviceName: Storage Controller Subsystem: Hewlett-Packard Company P420i [103c:3354] Kernel driver in use: hpsa Kernel modules: hpsa
You have to isolate it for use in a VM (Tools - System Devices)
Hi Squid, thanks for checking but, no it's not that one.
There are 3 HDD related devices in total:
1) Hp Smart Array P420i in HBA mode which is built-in - it works fine2) There is LSI SAS2008 in HBA mode same works fine
3) HP sc11xe hba which is not visible anywhere in Unraid
-
-
Hi All,
I've recently acquired HP ML350 G8 which has HBA card: "hp sc11xe hba"
which is in use to attach tape drive.I did a bit of searching/reading and aware that Unraid itself doesn't have any backup soft to work with the tape
but I'd like to path it through to the Windows VM and try to use it from there.
However when I start playing with it, I've figured out with surprise that Unraid doesn't see this card at all, like it's not exist
(it is perfectly visible in Bios, during startup and even in ILO (without the name though))
Does anyone have any ideas what direction I might to continue my searches or you think there is no hope left in my case?
Thanks and regards,
Sergiy -
On 11/17/2020 at 5:01 PM, ich777 said:
I'm unsure if Mining cards have the NVENC encoder on it...
But what you can do is flash a regular BIOS... but please be aware that this could toally destroy your card...
you can in theory, you can't on practice.
It was tested already and even though its possible to hack programming tool for to not complain about BIOS version's mismatch, GPU itself doesn't accept new regular BIOS. the only way (and this time its hypothetical ) is to flash regular BIOS on programator
-
13 hours ago, trurl said:
All New Config does is reset your disk assignments. Nothing else is changed.
Thank you trurl,
In this case probably there is nothing to worry about.
-
9 hours ago, JorgeB said:
It didn't work because that is a RAID controller, even in HBA mode, it's not a true HBA, if you still want to use it you'd need to do a new config and re-assign all disks, note that if in the future you replace the controller with a different one you'll need to do the same, it would be best to use a true HBA, LSI preferred.
Thanks for advise Jorge, however when you say "new config" can you clarify what exactly is going to be new with new config? E.g. all Unraid OS will look like after "Factory Reset" or just new array will be created but all shares, Dockers, VMs etc. will remain untouched or even some 3rd scenario?
I probably can download trial unraid and play myself, but if some one can advise from practice it might save some time.
-
Hi All,
I do apologies if this topic been discussed already, but quick search didn't give me a clear answer on the question.
My request sounds very simple and straightforward but want to protect myself from doing something stupid which can ruin everything or significant part...
I do have unRaid 6.8.3 with 6 SAS drives connected to Dell perc h310 in HBA (IT) mode.
I want (need?) just replace HBA card to HP Smart Array P420i which is also in HBA (IT) mode.
My problem is: when I did test run, I've figured out that all HDD's IDs got changed with new HBA (I still can guess which drive was on which position, its not a problem, but exact IDs are different now) and unRaid is complaining about too many missing disk (or whatever is exact error)
Please kindly advise how I can migrate to new HBA without loosing not only data on drives (its pretty clear that if I'll remain the order data will stay in disks) but all Unraid configs as well, as I do have lots of config changes made here and there and don't want even try to repeat from scratch (and I'm worrying it will required if I chose the option "Create New Config")
Thank you in advance
-
@billington.mark
Hi Mark, may I ask what you upgraded to?Just curious what is the next step
Regards, Sergiy
-
On 2/6/2019 at 10:06 PM, barhorn said:
In unRAID 6, is it possible to create a cluster of unRAID servers using Gluster? Ideally I'd like to pool multiple servers together (various OS's, but unRAID is my current main storage).
I did try to install glusterfs manually (taking to the account unRAID is based on Slackware) but didn't get any success unfortunately
[Support] binhex - MinecraftBedrockServer
in Docker Containers
Posted
Hi @Fredrick
Did you manage to figured out why PF doesn't work?
@binhex don't you have a clue by any chance what might be wrong with port forwarding?
I do have similar issue: I'm not a big expert in the networking but all other services setup in a similar way (including the VPN server) works perfectly fine, when the only Minecraft server works only via LAN. Even via VPN it is shown as a server is unavailable.
Will be glad if anyone can share all sorts of ideas to test