burrbit Posted December 23, 2020 Share Posted December 23, 2020 Shut down system to give a quick dusting, upon reboot, I noticed dockers and VM's are missing. Also my 2 sandisk ssd's are not listed in the cahce drive section. Checked cabling, appears good. Diagnostic attached. asgard-diagnostics-20201222-2149.zip Quote Link to comment
JorgeB Posted December 23, 2020 Share Posted December 23, 2020 Looks like a connection problem, replace cables, power and SATA. Quote Link to comment
burrbit Posted December 24, 2020 Author Share Posted December 24, 2020 (edited) 19 hours ago, JorgeB said: Looks like a connection problem, replace cables, power and SATA. replaced power and sata, issue remains. Also plugged into new SATA ports on the motherboard. I guess my options are, adding a SATA card, and replacing the drives? If I am able to pull data off the drives can I just image the data to new SSDs? or will unraid want to wipe new drives? Edited December 24, 2020 by burrbit Quote Link to comment
JorgeB Posted December 24, 2020 Share Posted December 24, 2020 If it's not cables it's likely the devices, though extremely unlikely for both to fail at the same time. Quote Link to comment
burrbit Posted December 25, 2020 Author Share Posted December 25, 2020 19 hours ago, JorgeB said: If it's not cables it's likely the devices, though extremely unlikely for both to fail at the same time. Agreed, when I am not feeling so lazy I will attempt to remove the SSD's and see if they are detectable/readable in another computer. Theoretically if the drives are detected whats the likely hood of success of cloning them onto new SSD's and preserving my VM/s docker data? Quote Link to comment
JorgeB Posted December 25, 2020 Share Posted December 25, 2020 7 hours ago, burrbit said: Theoretically if the drives are detected whats the likely hood of success of cloning them onto new SSD's and preserving my VM/s docker data? Very good. Quote Link to comment
burrbit Posted December 26, 2020 Author Share Posted December 26, 2020 Alright, so I pulled both SSD's and am using an external connector to try and read the drives. It looks like they most have just died at the same time, maybe they got hit with static when I used my electric duster I am not sure. Here are the symptoms I have thus far. (windows will not read any data from both drives). Both are model SDSSDA-240G via sandisk. #1 shows up in device manager, but fails to show up under disk management. #2 shows up in neither. So far my course of action is to order new SSDs, run a parity check just in case, and attempt to recover data until my new drives arrive. Nothing of real value lost, just have to reconfigure dockers and possibly 1 virtual machine (at this point, I think the Vdisk is saved on a mechanical anyways, if not, still not a major loss) Thanks for input, Ill post if I need any further help or if anything else develops! 1 Quote Link to comment
burrbit Posted January 16, 2021 Author Share Posted January 16, 2021 So I went a head and put in a single SSD to act as a cache and a place to store my VM drives. I am not entirely sure how both SSDs failed at the same time, but hardware wise everything seems to be great and unraid has no issues now. My question is, to safeguard against another SSD failure, whats the best way to make sure my SSD data is backed up? Quote Link to comment
JorgeB Posted January 16, 2021 Share Posted January 16, 2021 2 hours ago, burrbit said: whats the best way to make sure my SSD data is backed up? Several ways of doing, important part is doing it regularly. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.