December 30, 20205 yr Good evening I recently bought a dvbt card for tv headend. Now this carat is not displayed correctly or not at all. Does anyone have an idea how to install the drivers or what I can do so that the card is displayed in the tv headend?
December 30, 20205 yr Are you sure that this is the right subthread? This is the German section? Have you installed the DVB plugin?
December 30, 20205 yr Author Höhö, Da habe ich wohl was verwechselt, also das DVB Plugin habe ich noch nicht Installiert, ich mache es gleich und melde mich dann zurück.
December 30, 20205 yr Author 50 minutes ago, ich777 said: Are you sure that this is the right subthread? This is the German section? Have you installed the DVB plugin? Which DVB Plugin do you mean
December 30, 20205 yr Du kannst hier ruhig auf deutsch schreiben. 5 minutes ago, Hirates said: Which DVB Plugin do you mean Du musst die 6.9.0 RC2 installieren, den server rebooten und danach das plugin installieren. Im Plugin Support unterforum gibts einen hilfethread. Such einfach nach DVB-Driver.
December 31, 20205 yr Author OK, jetzt habe ich das Plugin installiert. was ist genau mit (The Plugin tries to detect the correct Kernel Modules and load them at system start, but for some DVB cards it is necessary that you add a line to your '/boot/config/go' file like 'modprobe MODULENAME' and save the file. Replace MODULENAME by the Kernel Module that is needed for your card to initalize correctly, after that reboot the server.) gemeint?
December 31, 20205 yr 9 minutes ago, Hirates said: OK, jetzt habe ich das Plugin installiert. was ist genau mit (The Plugin tries to detect the correct Kernel Modules and load them at system start, but for some DVB cards it is necessary that you add a line to your '/boot/config/go' file like 'modprobe MODULENAME' and save the file. Replace MODULENAME by the Kernel Module that is needed for your card to initalize correctly, after that reboot the server.) gemeint? Wird deine Karte im Plugin angezeigt? Bitte vergiss nicht nach der installation des Plugins Unraid neuzustarten. Welche Karte hast du? EDIT: Das Plugin versucht das/die Kernel Module zu laden bei manchen Karten muss das aber manuell gemacht werden (ist bei ganz wenigen der Fall). Bitte lies dir auch durch wie du die Karte dann in TVheadend angezeigt bekommst.
December 31, 20205 yr Author Meine Karte (DVB-S/DVB-S2 HDTV PCI-Karte TECHNISAT SkyStar S2, bulk) wird nicht angezeigt, ich habe meinen Server nach der Installation neu gestartet.
January 1, 20215 yr 20 hours ago, Hirates said: Meine Karte (DVB-S/DVB-S2 HDTV PCI-Karte TECHNISAT SkyStar S2, bulk) wird nicht angezeigt, ich habe meinen Server nach der Installation neu gestartet. Hmm, ich würde das nicht im Unraid Server machen, da haste nur Probleme. Ich habe das so gelöst. Ich habe einen kleinen Debian Buster TVHeadend SAT2IP Server mit 3x Digital-Devices MaxS8 installiert. Der leitet alles weiter. In Unraid habe ich einen TVHeadend mit NVIDIA Transcoding Unterstützung installiert, der auf die 24 Tuner im SAT2IP Server zugreift. Damit funzt das richtig gut. Btw, die Technisat SkyStar S2 ist auch schon einwenig in die Jahre gekommen... Gibts da noch aktuelle Kernelmodule? Edited January 1, 20215 yr by sd007 Rechtschreibfehler
Archived
This topic is now archived and is closed to further replies.