Jonesgold Posted January 7, 2021 Share Posted January 7, 2021 Hi Had a problem with my hba cards which coused drives to be disabled due to errors. First was drive 8 disabled and while rebooting to re-add the drive, the array disabled parity drive 1. This made me replace my HBA cards, as I had similiar problems a few months ago. Problem is that after replacing the HBA cards all drives, except the two previously disabled ones, are now disabled. I am almost certain that all drives are fine, and nothing (important) should have been written to disk 8 during the time it was disabled. What would be the best way to restart the array -> Go to tools ->New config, and re-add all drives in their old position, or is there a better way? tje Quote Link to comment
JorgeB Posted January 8, 2021 Share Posted January 8, 2021 Please post the diagnostics: Tools -> Diagnostics Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.