FattyDave18 Posted January 16, 2021 Share Posted January 16, 2021 (edited) Had a power cut yesterday which turned off my server. When I turned it back on it started a parity check (or perhaps just a read check) which failed promptly and set my disk 1 to disabled. This disk is fairly new. I've run a SMART short & extended test on it both of which passed. Would this just have been caused by the shutdown? I ran a full parity check on the 1st and it passed. Should I consider trying to RMA the disk? (It was shucked from a usb enclosure but imagine I could get it back together). If the disk is fine how do I stop it showing as disabled? I stopped/started the array and it didn't change anything. Many thanks. I'm quite new to this so apologies for any ignorance. SMART test download & system Diag download attached. furnnet-servur-diagnostics-20210116-1052.zip furnnet-servur-smart-20210116-0244.zip Edited January 16, 2021 by FattyDave18 Quote Link to comment
JorgeB Posted January 16, 2021 Share Posted January 16, 2021 Disk looks OK, replace/swap cables to rule them out and rebuild on top (if the emulated disk is still mounting correctly). Quote Link to comment
FattyDave18 Posted January 16, 2021 Author Share Posted January 16, 2021 26 minutes ago, JorgeB said: Disk looks OK, replace/swap cables to rule them out and rebuild on top (if the emulated disk is still mounting correctly). Thank you! Rebuild underway! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.