Reddog1400 Posted March 6, 2021 Share Posted March 6, 2021 Hello, I have been dealing with some issues getting through a parity check after I replaced a drive that went bad. I swapped out one of the drives in my array and ran through the rebuild. All seemed okay. Then it ran a parity check and had like 6 sync errors. It finished just fine. When I logged on this morning, the server was hung and I had to force a shutdown. Naturally, when it came back up it started a check. 300ish errors and the Parity all but stopped. I am at a loss of what to do. I have attached my logs before I had to force another shutdown. There is one from this morning and this evening. defiant-diagnostics-20210306-1117.zipdefiant-diagnostics-20210306-1830.zip Quote Link to comment
JorgeB Posted March 7, 2021 Share Posted March 7, 2021 Btrfs is finding data corruption, Ryzen with overclocked RAM is known to do that in some cases, reduce RAM speed and run memtest if errors persist. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.