captain_video Posted March 15, 2021 Share Posted March 15, 2021 (edited) UnRAID version 6.9.1 and 2021.01.03 version of preclear. I tried running preclear on a new disk and it craps out with the following errors in the log: Mar 15 15:28:51 preclear_disk_Z84013MY_11172: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh: line 475: /tmp/.preclear/sdaf/dd_output_complete: No such file or directory Mar 15 15:28:51 preclear_disk_Z84013MY_11172: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh: line 475: [: -gt: unary operator expected Mar 15 15:28:51 preclear_disk_Z84013MY_11172: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh: line 478: /tmp/.preclear/sdaf/dd_output_complete: No such file or directory Mar 15 15:28:51 preclear_disk_Z84013MY_11172: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh: line 480: /tmp/.preclear/sdaf/dd_output: No such file or directory The above messages are repeated about a dozen times before it just stops. Note that the disk being precleared is designated as device sdaf. This happened with the previous two versions of unRAID and I have always upgraded to the latest version of preclear when it was posted. I've never had any issues with preclear before. Is there a way to downgrade back to a previous version? I just removed the plugin and reinstalled it from the community apps tab. I'm rebooting the server to see if I can get it working again. The server got hung up and would not complete the boot process. This happened with the last drive I tried to pre-clear. The server would boot fine if I removed the drive from the pre-clear slot. OK, I also swapped the slot where I had been inserting drives to perform the preclear as well as replacing the cable that was connected to the backplane. Pre-clear is at 2% and counting. So far so good. This is the furthest it's gone since I started having these issues so I'm thinking it's either the backplane connector or the cable. Edited March 15, 2021 by captain_video Link to comment
JorgeB Posted March 16, 2021 Share Posted March 16, 2021 Please use the existing plugin support thread: Link to comment
Recommended Posts