March 16, 20215 yr Hello! I currently have a backup Unraid server that I recently upgraded to version 6.9.1. Backup server spec's: ASRockRack C236 WSI (bios v2.70) i3-6100 CPU 8GB ECC RAM 2 VM's (all powered off) Docker - Not installed Post upgrade, the Dynamix S3 sleep function no longer worked (system would start sleep - and then immediately power back up). Further troubleshooting showed a single CPU core was maxed out @ 100%. The 100% Single CPU core occurred whether the array was loaded or not. Ran a diagnostics (attached). Rolled back to version 6.8.3, the CPU cores now operates properly (as does my sleep function). What is strange is that I have 2 other unraid servers (using identical motherboard) that work with S3 sleep (no CPU maxing out either). Is it possible this is an issue with the Flash boot drive (need to wipe clean and reload)? Any other Ideas? Thanks. Frank mediabackup-diagnostics-20210316-1208.zip
March 16, 20215 yr Hello @pancho, looks like your diagnostics are unavailable. Try to upload them again.
April 8, 20215 yr Author Upgraded today from rolledback version (6.8.3) to the latest version 6.9.2, unfortunately same issue as above where a single CPU core locks at @ 100% endlessly. The 100% Single CPU core occurred whether the array was loaded or not. Attached new diagnostics. Anyone have any suggestions? Thanks. mediabackup-diagnostics-20210408-1422.zip
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.