I have one unassigned drive that isn't showing any SMART info when you click on the drive name. Clicking on SMART short self-test: does nothing. Although using smartctl -a /dev/sdn I can see the SMART data. I also have a bunch of errors in my log for other drives that aren't there. Maybe old Unassigned Devices?

 

And out of curiosity, why does this particular drive show up as sdn while the other drives show up as Dev 1, Dev2... ?

 

 

 

 

Edited August 16, 20232 yr by adminmat

1 hour ago, adminmat said:

I have one unassigned drive that isn't showing any SMART info when you click on the drive name. Clicking on SMART short self-test: does nothing. Although using smartctl -a /dev/sdn I can see the SMART data. I also have a bunch of errors in my log for other drives that aren't there. Maybe old Unassigned Devices?

 

And out of curiosity, why does this particular drive show up as sdn while the other drives show up as Dev 1, Dev2... ?

 

 

 

tower-diagnostics-20210519-1635.zip 141.03 kB · 0 downloads

You have some drive errors:

May 19 16:13:27 Tower unassigned.devices: Adding disk '/dev/sdn1'...
May 19 16:13:27 Tower unassigned.devices: Mount drive command: /sbin/mount -t ntfs -o rw,auto,async,noatime,nodiratime,nodev,nosuid,nls=utf8,umask=000 '/dev/sdn1' '/mnt/disks/ChiaHarvest2'
May 19 16:13:33 Tower ntfs-3g[841]: Version 2017.3.23 integrated FUSE 27
May 19 16:13:33 Tower ntfs-3g[841]: Mounted /dev/sdn1 (Read-Write, label "ChiaHarvest2", NTFS 3.1)
May 19 16:13:33 Tower ntfs-3g[841]: Cmdline options: rw,noatime,nodiratime,nodev,nosuid,nls=utf8,umask=000
May 19 16:13:33 Tower ntfs-3g[841]: Mount options: rw,nodiratime,nodev,nosuid,nls=utf8,allow_other,nonempty,noatime,default_permissions,fsname=/dev/sdn1,blkdev,blksize=4096
May 19 16:13:33 Tower ntfs-3g[841]: Global ownership and permissions enforced, configuration type 1
May 19 16:13:33 Tower unassigned.devices: Successfully mounted '/dev/sdn1' on '/mnt/disks/ChiaHarvest2'.
May 19 16:13:33 Tower unassigned.devices: Adding SMB share 'ChiaHarvest2'.
May 19 16:13:33 Tower unassigned.devices: Issue spin down timer for device '/dev/sdn'.
May 19 16:13:59 Tower ntfs-3g[20560]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
May 19 16:13:59 Tower ntfs-3g[20560]: Failed to read index block: Input/output error
May 19 16:13:59 Tower kernel: Buffer I/O error on dev sdm1, logical block 244188261, async page read
May 19 16:16:01 Tower ntfs-3g[20560]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
May 19 16:16:01 Tower ntfs-3g[20560]: Failed to read index block: Input/output error
May 19 16:16:01 Tower kernel: Buffer I/O error on dev sdm1, logical block 244188261, async page read
May 19 16:18:02 Tower ntfs-3g[20560]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
May 19 16:18:02 Tower ntfs-3g[20560]: Failed to read index block: Input/output error
May 19 16:18:02 Tower kernel: Buffer I/O error on dev sdm1, logical block 244188261, async page read
May 19 16:20:03 Tower ntfs-3g[20560]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
May 19 16:20:03 Tower ntfs-3g[20560]: Failed to read index block: Input/output error
May 19 16:20:03 Tower kernel: Buffer I/O error on dev sdm1, logical block 244188261, async page read

 

I would do the following:

• Update all plugins.
• Remove preclear plugin temporarily.
• Update Unraid to 6.9.2 and get off the RC.
• Reboot server.

Post further issues on the UD forum.

12 minutes ago, dlandon said:

You have some drive errors:

 

I would do the following:

• Update all plugins.
• Remove preclear plugin temporarily.
• Update Unraid to 6.9.2 and get off the RC.
• Reboot server.

Post further issues on the UD forum.

 

 

Will do.  BTW, do you know what these errors mean? Could they have been when I disconnected the UD disk from a windows network share? Or some other process that was trying to access it when I unmounted it?

 

13 minutes ago, adminmat said:

 

 

Will do.  BTW, do you know what these errors mean? Could they have been when I disconnected the UD disk from a windows network share? Or some other process that was trying to access it when I unmounted it?

 

Are you sure it was properly umnounted.

26 minutes ago, dlandon said:

Are you sure it was properly umnounted.

Yes, I clicked unmounted and waited til it said mount. I did notice after I remounted it that it seemed to come line and back online on it's own. Meaning it said "unmount" then "mount" then "unmount" by itself. I then unmounted and moved it to another USB port.

 

odd indeed. Could be a bad USB port or Easystore drive...

24 minutes ago, adminmat said:

Yes, I clicked unmounted and waited til it said mount. I did notice after I remounted it that it seemed to come line and back online on it's own. Meaning it said "unmount" then "mount" then "unmount" by itself. I then unmounted and moved it to another USB port.

 

odd indeed. Could be a bad USB port or Easystore drive...

Could be.  If you put the drive in a USB3 port, try a USB2 port.

20 hours ago, dlandon said:

You have some drive errors:

 

I would do the following:

• Update all plugins.
• Remove preclear plugin temporarily.
• Update Unraid to 6.9.2 and get off the RC.
• Reboot server.

Post further issues on the UD forum.

 

This solved the issue. It's now showing as Dev 1 (sdb). No more errors and works with the docker container.

 

I have another question about an NVMe drive that is not showing up in atop. Goal is to watch I/O and get stats. It's running on an PCIe adapter. Drive works fine. Shows in the unraid GUI. Any thoughts why it's not showing in atop?