Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

new build won't enter BIOS with LSI 9207-8i (IBM M5110) PCIe card installed

Featured Replies

Sitting on the breadboard right now. I can get into the BIOS and even boot to the unRAID USB with the CPU, RAM, and m.2 SSD insalled, but with the LSI card in the x16 slot I get nothing but a blank screen. The green LED on the card is blinking and the heatsink is getting warm, but still no magic after 15 minutes in this state. This is a used/refurb card that I found on eBay advertised as already flashed into IT mode and ready for unRAID, trueNAS, etc.

 

At this point, I'm wondering about two things: 1) is this card compatible with my motherboard? I did a cursory search but didn't turn up anything meaningful. I can't imagine why they shouldn't work together, but it's one possibility. 2) is this card working as it should? I got it from a reputable seller, but I suppose unexpected failures can and do occur during shipping.  

 

I have been crawling through a few forum posts of people with problems similar to mine, but none of what I've found seems to be getting me anywhere. Any help would be greatly appreciated.

 

Hardware:

intel core i5-9400T

Gigabyte B365M DS3H motherboard

2x Team Elite 16GB DDR4 3200

Sabrent Rocket Q 500GB NVMe PCIe M.2 2280

LSI 9207-8i (IBM M5110) RAID card, flashed to IT mode*

Can you get to the "bios" of the LSI card (CTRL-S if I remember) when it's itemizing the drives connected to it?

16 hours ago, gillflicka said:

but with the LSI card in the x16 slot I get nothing but a blank screen.

Maybe a defective controller...

And yes, the card is working on your hardware.

Edited by Zonediver

  • Author
On 6/27/2021 at 7:59 AM, Zonediver said:

Maybe a defective controller...

 

Beginning to lean in that direction.

 

Spamming Ctrl-C or Ctrl-S on startup doesn't affect behavior. The computer boots up and the green LED on the card blinks for a few seconds and then two red LEDs flash and the whole rig, or the fans at least, cuts off and powers back up. It will stay in that state and just get warmer indefinitely it seems.

 

At this point I intend to reach out to the seller and see if they have any better ideas before settling on a return. Thanks a bunch for the help.

 

 

  • 2 weeks later...

Was it a defective card?  I'm looking to purchase the same card on ebay.  I noticed the seller say the card does not come with any boot services, did your card come with uefi bios?

  • 3 years later...
On 6/26/2021 at 4:13 PM, gillflicka said:

Sitting on the breadboard right now. I can get into the BIOS and even boot to the unRAID USB with the CPU, RAM, and m.2 SSD insalled, but with the LSI card in the x16 slot I get nothing but a blank screen. The green LED on the card is blinking and the heatsink is getting warm, but still no magic after 15 minutes in this state. This is a used/refurb card that I found on eBay advertised as already flashed into IT mode and ready for unRAID, trueNAS, etc.

 

At this point, I'm wondering about two things: 1) is this card compatible with my motherboard? I did a cursory search but didn't turn up anything meaningful. I can't imagine why they shouldn't work together, but it's one possibility. 2) is this card working as it should? I got it from a reputable seller, but I suppose unexpected failures can and do occur during shipping.  

 

I have been crawling through a few forum posts of people with problems similar to mine, but none of what I've found seems to be getting me anywhere. Any help would be greatly appreciated.

 

Hardware:

intel core i5-9400T

Gigabyte B365M DS3H motherboard

2x Team Elite 16GB DDR4 3200

Sabrent Rocket Q 500GB NVMe PCIe M.2 2280

LSI 9207-8i (IBM M5110) RAID card, flashed to IT mode*

Did you ever resolve this? I am experiencing the same symptoms with the same model card right now.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.