Lygris Posted July 19, 2021 Share Posted July 19, 2021 overnight my parity disk disabled, I think because I had logs stating apparently 4 disks went unwritable for some amount of time. I checked the read/write speeds of all my disks and they all seem fine, however when i'm trying to resync parity it's incredibly slow at 25MB/s, normally I would see something around 100MB/s. Diags attached, not sure what to look for. unraid-diagnostics-20210719-1212.zip Quote Link to comment
JorgeB Posted July 19, 2021 Share Posted July 19, 2021 See a lot of HBA issues, also some CPU, if you can it would be good to test bare metal first. Quote Link to comment
Lygris Posted July 19, 2021 Author Share Posted July 19, 2021 Working on getting the ip reassigned in bare metal right now. Had the same thought. I know it's not supported but i've run this as a vm on ESXI for years now and recently switched it to proxmox, but I don't think i've had to run a parity check with it running on proxmox yet. Would you know if there's anything special that needs to be done for a proxmox unraid vm? All the drives are being done with pci passthrough so I didnt think the parity speed would change. Quote Link to comment
Lygris Posted July 19, 2021 Author Share Posted July 19, 2021 1 hour ago, JorgeB said: See a lot of HBA issues, also some CPU, if you can it would be good to test bare metal first. Works much better on bare metal, back at ~100MB/s. Curious about the HBA & CPU issues. Where did you find those in the diag and are they still in this diag taken from bare metal? thanks! unraid-diagnostics-20210719-1408.zip Quote Link to comment
JorgeB Posted July 20, 2021 Share Posted July 20, 2021 Logs on bare metal are clear so far. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.