July 29, 20214 yr Hi all, hope you are well. For a while I have been having issues, where Unraid would hang, and I could not access the GUI or ping the Unraid server, but after around 2 mins it would come back up. I was running older hardware, so decided to upgrade. Went with a Ryzen CPU, and 2.5G NIC. All seemed to be happy, but I am still getting the occasional hang. I am investigating outside influences, but I was wondering if somebody would be able to look at my diagnostics and see if I have missed anything? I have looked through, but nothing jumped out. The hang happened around 7.20am BST. Any advice, help would be appreciated. gamingnas-diagnostics-20210729-0721.zip Edited July 29, 20214 yr by Theldron
July 29, 20214 yr Community Expert Start here: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173
July 29, 20214 yr Author 4 hours ago, JorgeB said: Start here: https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173 Hey thanks for that, the issue has been going on for a while when I had a Intel I7 setup. The server will lockup for about 1-2 mins, but seems to carry on working in the background, but I cannot access the GUI via the ip address or ping the server. Just to cover all bases, I have checked, I only seem to have C-States not just C6 do I need to disable all C-States? Thanks
July 29, 20214 yr Community Expert 35 minutes ago, Theldron said: I have checked, I only seem to have C-States not just C6 do I need to disable all C-States? Quote make sure bios is up to date, then look for "Power Supply Idle Control" (or similar) and set it to "typical current idle" (or similar).
July 29, 20214 yr Author 2 minutes ago, JorgeB said: Hi yeah, the BIOS is on the latest and I have adjusted the Power Supply to the recommended. Sorry is it ok to disable C-States?
July 29, 20214 yr Community Expert 28 minutes ago, Theldron said: Sorry is it ok to disable C-States? It's not needed if you set power supply idle control correctly.
July 29, 20214 yr Author 7 hours ago, JorgeB said: It's not needed if you set power supply idle control correctly. Thanks, I am sure I did set it but will double check.
July 30, 20214 yr Author 16 hours ago, JorgeB said: It's not needed if you set power supply idle control correctly. Thanks, I have checked and the power supply idle control is on Typical Current Idle. Will keep an eye on the server.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.