Jump to content

Two disks just died?

Featured Replies

  • Community Expert

Very unlikely that both disks died at the same time unless there was some smoke involved.

 

Disks 2, 7 are disconnected, so the array can't be started because there are too many missing disks. The disks aren't even disabled. If you get them connected again everything should be good.

 

What controller are those disks using?

 

 

  • Community Expert
LSISAS2308: FWVersion(20.00.02.00)

 

Update LSI firmware to latest, that one has known issues, then reboot and post new diags.

  • Community Expert

New firmware wans't going to make the disks appear, it was just in case they dropped because of that, try power cycling the server (not just rebooting), if they don't come back online replace/swap cables on those disks.

  • Author

obviously...

Yep I did that all, sdj was back for something around 20-30min, then gone again, the second one is still cycling through on-off

I just get DELL MD1200 I'll try with it, maybe some cables are dead (cables from china, but all worked for a year with no problem ;/)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...