September 2, 20214 yr Hi folks Today at 08:12 CEST both parity disks became disabled due to errors. I had the same a few weeks ago, but with other disks. I replaced already the power supply, the motherboard, the SATA cables, obviously without success. Please find attached the diagnostic logs. Any help is highly appreciated! best regards Andreas diagnostics-20210902-1027.zip
September 3, 20214 yr Community Expert Looks like you are currently rebuilding parity but aren't rebuilding parity2. Why?
September 3, 20214 yr Community Expert Do the drives have anything in common that might have caused them both to lose connection? Power cable? Controller?
September 3, 20214 yr Author 2 hours ago, trurl said: Looks like you are currently rebuilding parity but aren't rebuilding parity2. Why? I thought it would be wise to reduce the load. Therefore I go step by step. Parity 1 is now finished and back online. Paritiy 2 will be finished soon. I think, those disk errors happen when there is high data transfer load on the device, e.g. from a large backup or when a VM pulls large backups. Just a feeling!
September 3, 20214 yr Author 2 hours ago, trurl said: Do the drives have anything in common that might have caused them both to lose connection? Power cable? Controller? The disks are connected to different power supply lanes but are connected to the same SAS controller, which is a LSI 9207-8i. I only have this controller, beside of the connectors on the motherboard. The LSI controller is equipped with a fan.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.