n3cron Posted September 3, 2021 Share Posted September 3, 2021 Ich habe nun eine zweite Grafikkarte die auch so funktioniert wie gewuenscht eingebaut, bekomme aber beim zuweisen der staerkeren Grafikkarte an die VM genau diesen Fehler. Anbei einige Logs, evtl hat schon mal jemand einen Fehler gehabt oder den gleichen. Quote ErrorWarningSystemArrayLogin -device pcie-root-port,port=0xb,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x3 \ -device pcie-root-port,port=0xc,chassis=5,id=pci.5,bus=pcie.0,addr=0x1.0x4 \ -device pcie-root-port,port=0xd,chassis=6,id=pci.6,bus=pcie.0,addr=0x1.0x5 \ -device pcie-root-port,port=0xe,chassis=7,id=pci.7,bus=pcie.0,addr=0x1.0x6 \ -device pcie-pci-bridge,id=pci.8,bus=pci.1,addr=0x0 \ -device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x7.0x7 \ -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x7 \ -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x7.0x1 \ -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x7.0x2 \ -device virtio-serial-pci,id=virtio-serial0,bus=pci.2,addr=0x0 \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/virtio-win-0.1.190.iso","node-name":"libvirt-4-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-4-format","read-only":true,"driver":"raw","file":"libvirt-4-storage"}' \ -device ide-cd,bus=ide.1,drive=libvirt-4-format,id=sata0-0-1 \ -blockdev '{"driver":"host_device","filename":"/dev/disk/by-id/ata-WDC_WDS250G2B0B-00YS70_175106420433","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \ -device ide-hd,bus=ide.2,drive=libvirt-3-format,id=sata0-0-2,bootindex=1,write-cache=on \ -blockdev '{"driver":"host_device","filename":"/dev/disk/by-id/ata-CT500MX500SSD1_1823E141E648","node-name":"libvirt-2-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-2-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-2-storage"}' \ -device ide-hd,bus=ide.3,drive=libvirt-2-format,id=sata0-0-3,write-cache=on \ -blockdev '{"driver":"host_device","filename":"/dev/disk/by-id/nvme-PNY_CS3030_1TB_SSD_PNY43191910240406C1E","node-name":"libvirt-1-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-1-storage"}' \ -device ide-hd,bus=ide.4,drive=libvirt-1-format,id=sata0-0-4,write-cache=on \ -netdev tap,fd=33,id=hostnet0 \ -device virtio-net,netdev=hostnet0,id=net0,mac=52:54:00:2a:e6:a9,bus=pci.3,addr=0x0 \ -chardev pty,id=charserial0 \ -device isa-serial,chardev=charserial0,id=serial0 \ -chardev socket,id=charchannel0,fd=34,server,nowait \ -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \ -device usb-tablet,id=input0,bus=usb.0,port=6 \ -device vfio-pci,host=0000:26:00.0,id=hostdev0,bus=pci.4,addr=0x0 \ -device vfio-pci,host=0000:26:00.1,id=hostdev1,bus=pci.5,addr=0x0 \ -device usb-host,hostbus=1,hostaddr=2,id=hostdev2,bus=usb.0,port=1 \ -device usb-host,hostbus=1,hostaddr=5,id=hostdev3,bus=usb.0,port=2 \ -device usb-host,hostbus=3,hostaddr=2,id=hostdev4,bus=usb.0,port=3 \ -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \ -msg timestamp=on 2021-09-03 07:15:52.634+0000: Domain id=1 is tainted: high-privileges 2021-09-03 07:15:52.634+0000: Domain id=1 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) 2021-09-03 07:15:54.912+0000: shutting down, reason=failed Vfio Log Quote Loading config from /boot/config/vfio-pci.cfg BIND=0000:26:00.0|10de:2206 0000:26:00.1|10de:1aef --- Processing 0000:26:00.0 10de:2206 Vendor:Device 10de:2206 found at 0000:26:00.0 IOMMU group members (sans bridges): /sys/bus/pci/devices/0000:26:00.0/iommu_group/devices/0000:26:00.0 /sys/bus/pci/devices/0000:26:00.0/iommu_group/devices/0000:26:00.1 Binding... Successfully bound the device 10de:2206 at 0000:26:00.0 to vfio-pci --- Processing 0000:26:00.1 10de:1aef Vendor:Device 10de:1aef found at 0000:26:00.1 IOMMU group members (sans bridges): /sys/bus/pci/devices/0000:26:00.1/iommu_group/devices/0000:26:00.0 /sys/bus/pci/devices/0000:26:00.1/iommu_group/devices/0000:26:00.1 Binding... 0000:26:00.0 already bound to vfio-pci 0000:26:00.1 already bound to vfio-pci Successfully bound the device 10de:1aef at 0000:26:00.1 to vfio-pci --- vfio-pci binding complete Devices listed in /sys/bus/pci/drivers/vfio-pci: lrwxrwxrwx 1 root root 0 Sep 3 02:13 0000:26:00.0 -> ../../../../devices/pci0000:00/0000:00:03.1/0000:26:00.0 lrwxrwxrwx 1 root root 0 Sep 3 02:13 0000:26:00.1 -> ../../../../devices/pci0000:00/0000:00:03.1/0000:26:00.1 ls -l /dev/vfio/ total 0 crw------- 1 root root 249, 0 Sep 3 02:13 16 crw-rw-rw- 1 root root 10, 196 Sep 3 02:13 vfio tower-diagnostics-20210903-0922.zip Quote Link to comment
n3cron Posted September 3, 2021 Author Share Posted September 3, 2021 Quote <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 10 Hardboot</name> <uuid>00000000-0000-0000-0000-xxxxx/uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>16777216</memory> <currentMemory unit='KiB'>16777216</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>16</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='12'/> <vcpupin vcpu='2' cpuset='1'/> <vcpupin vcpu='3' cpuset='13'/> <vcpupin vcpu='4' cpuset='2'/> <vcpupin vcpu='5' cpuset='14'/> <vcpupin vcpu='6' cpuset='3'/> <vcpupin vcpu='7' cpuset='15'/> <vcpupin vcpu='8' cpuset='4'/> <vcpupin vcpu='9' cpuset='16'/> <vcpupin vcpu='10' cpuset='6'/> <vcpupin vcpu='11' cpuset='18'/> <vcpupin vcpu='12' cpuset='8'/> <vcpupin vcpu='13' cpuset='20'/> <vcpupin vcpu='14' cpuset='10'/> <vcpupin vcpu='15' cpuset='22'/> </cputune> <os> <type arch='x86_64' machine='pc-q35-5.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/00000000-0000-0000-0000-xxxxx_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none' migratable='on'> <topology sockets='1' dies='1' cores='8' threads='2'/> <cache mode='passthrough'/> <feature policy='require' name='topoext'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.190.iso'/> <target dev='hdb' bus='sata'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/disk/by-id/ata-WDC_WDS250G2B0B-00YS70_175106420433'/> <target dev='hdc' bus='sata'/> <boot order='1'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/disk/by-id/ata-CT500MX500SSD1_1823E141E648'/> <target dev='hdd' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/disk/by-id/nvme-PNY_CS3030_1TB_SSD_PNY43191910240406C1E'/> <target dev='hde' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='4'/> </disk> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x8'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x9'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0xa'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0xb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/> </controller> <controller type='pci' index='5' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='5' port='0xc'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x4'/> </controller> <controller type='pci' index='6' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='6' port='0xd'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x5'/> </controller> <controller type='pci' index='7' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='7' port='0xe'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x6'/> </controller> <controller type='pci' index='8' model='pcie-to-pci-bridge'> <model name='pcie-pci-bridge'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:2a:e6:a9'/> <source bridge='br0'/> <model type='virtio-net'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='6'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x26' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x26' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x0205'/> <product id='0x0001'/> </source> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1b1c'/> <product id='0x1ba0'/> </source> <address type='usb' bus='0' port='2'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x258a'/> <product id='0x1007'/> </source> <address type='usb' bus='0' port='3'/> </hostdev> <memballoon model='none'/> </devices> </domain> Anbei noch den Auszug meiner VM, angedacht war die als Dualboot faehig zu machen, dabei handelt es sich um meine Bare Metal Windows-Installation die ich ueber Unraid laden moechte. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.