rajk Posted December 6, 2021 Share Posted December 6, 2021 (edited) Unraid version: 6.9.2 Hi all I have an unraid server that consists of the following: Motherboard: Asus P5Q Premium CPU : Intel Core 2 Duo E7400 Memory 2GB Parity Disk: Seagate Ironwolf Pro 4TB Disk 1: Seagate Ironwolf Pro 4TB Cache Drive: Crucial MX500 1TB I just purchased an additional WD Red Pro 4TB drive. I installed it into a spare slot in my rack and started the pre clear plugin and selected the gfjdarmim 1.0.22 script. I just went for all other default options and started the script. I get the following error ;error encountered, please verify log' . In the preclear log (see below), It says something about low memory. I know i only have 2GB but is this really a problem for pre clear to work? If it is, is there anyway to reduce the meomry load? Here is the preclear log, any guidance would be appreciated! Dec 06 13:23:38 preclear_disk_VBH0L3ZF_10889: Command: /usr/local/emhttp/plugins/preclear.disk/script/preclear_disk.sh --cycles 1 --no-prompt /dev/sdf Dec 06 13:23:38 preclear_disk_VBH0L3ZF_10889: Preclear Disk Version: 1.0.22 Dec 06 13:23:38 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T. info type: default Dec 06 13:23:38 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T. attrs type: default Dec 06 13:23:38 preclear_disk_VBH0L3ZF_10889: Disk size: 4000787030016 Dec 06 13:23:38 preclear_disk_VBH0L3ZF_10889: Disk blocks: 976754646 Dec 06 13:23:38 preclear_disk_VBH0L3ZF_10889: Blocks (512 bytes): 7814037168 Dec 06 13:23:38 preclear_disk_VBH0L3ZF_10889: Block size: 4096 Dec 06 13:23:38 preclear_disk_VBH0L3ZF_10889: Start sector: 0 Dec 06 13:23:41 preclear_disk_VBH0L3ZF_10889: Pre-read: pre-read verification started (1/5).... Dec 06 13:23:41 preclear_disk_VBH0L3ZF_10889: Pre-Read: dd if=/dev/sdf of=/dev/null bs=2097152 skip=0 count=4000787030016 conv=noerror iflag=nocache,count_bytes,skip_bytes Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: size: 946212, available: 93896, free: 9% Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: Filesystem 1K-blocks Used Available Use% Mounted on Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: rootfs 946212 852316 93896 91% / Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: devtmpfs 946220 0 946220 0% /dev Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: tmpfs 1020916 0 1020916 0% /dev/shm Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: cgroup_root 8192 0 8192 0% /sys/fs/cgroup Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: tmpfs 131072 304 130768 1% /var/log Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: /dev/sda1 15000232 294664 14705568 2% /boot Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: overlay 946212 852316 93896 91% /lib/modules Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: overlay 946212 852316 93896 91% /lib/firmware Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: tmpfs 1024 0 1024 0% /mnt/disks Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: tmpfs 1024 0 1024 0% /mnt/remotes Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: Low memory detected, aborting... Dec 06 13:23:44 preclear_disk_VBH0L3ZF_10889: Pre-read: pre-read verification failed! Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: Error: Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: ATTRIBUTE INITIAL NOW STATUS Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: Reallocated_Sector_Ct 0 0 - Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: Power_On_Hours 0 0 - Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: Temperature_Celsius 33 33 - Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: Reallocated_Event_Count 0 0 - Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: Current_Pending_Sector 0 0 - Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: Offline_Uncorrectable 0 0 - Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: UDMA_CRC_Error_Count 0 0 - Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: S.M.A.R.T.: SMART overall-health self-assessment test result: PASSED Dec 06 13:23:46 preclear_disk_VBH0L3ZF_10889: error encountered, exiting... Edited December 6, 2021 by rajk Link to comment
JorgeB Posted December 6, 2021 Share Posted December 6, 2021 Please use the existing plugin support thread: Link to comment
Recommended Posts