December 8, 20214 yr System info: Version: 6.8.3 Background: My old hardware died from what I suspect was a motherboard failure. I had to do a hard shutdown on the old Unraid OS before the hardware died. Unraid was working perfectly fine up until this point. I just got a new NAS that runs Unraid to replace the old NAS. I'm transferring over the USB drive from the old machine to this new one, along with the old drives. Problem: When I decrypt my drives and start the array, I get stuck while mounting the disks. Unraid said it had to do a parity check. This was because I performed an unclean shutdown. It's been 22 hours since then, and I can't tell whether the parity check has started or not. I haven't gotten any email notifications about the parity check starting yet, so I assume it's stuck trying to mount. Troubleshooting: I tried maintenance mode. No problems here, but my problem is that the array doesn't start. I tried booting Unraid into safe mode and mounting the array. I still have problems, even in safe mode Docker is disabled I've uploaded diagnostics. Help would be much appreciated. nastyraid-diagnostics-20211207-2252.zip Edited December 8, 20214 yr by iRAnGEiNGLeTriac
December 8, 20214 yr Author Yes, everything with the webUI is working, except that when I click the logs button, the new window gets stuck loading.
December 8, 20214 yr Community Expert If you have CLI/SSH access get and post the syslog: https://wiki.unraid.net/Viewing_the_System_Log
December 9, 20214 yr Author 17 hours ago, JorgeB said: If you have CLI/SSH access get and post the syslog: https://wiki.unraid.net/Viewing_the_System_Log But it's already in the zipped diagnostics. I've re-uploaded the syslog syslog
December 9, 20214 yr Community Expert I was hopping there would be some more lines logged, not much to go on with that one, looks like an Nginx issue.
December 10, 20214 yr Author On 12/9/2021 at 4:25 AM, JorgeB said: I was hopping there would be some more lines logged, not much to go on with that one, looks like an Nginx issue. That's unfortunate. Do you know how to safely shutdown the array or power off Unraid?
December 10, 20214 yr Community Expert Type reboot or poweroff in the console depending on what you want to do.
December 10, 20214 yr Author 4 minutes ago, JorgeB said: Type reboot or poweroff in the console depending on what you want to do. Didn't work. Whenever I do that, get the syslog message that server is shutting down, but nothing happens. Most likely because the array is stuck trying to mount disks. shutdown[10731]: shutting down for system reboot
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.