Drackeo Posted January 2, 2022 Share Posted January 2, 2022 I have my system set to run an Auto-Correcting Parity Check every 2 months (not much super important info mostly just media). The sync just started today and I logged in to check it out and noticed that I'm sitting at 2813 Sync Errors. Every other time this has run It was sitting at 0 so this is a first for me. What exactly are Sync Errors and what can I do to check everything out to make sure theres not some MAJOR issue going on? Reading the Wiki it sounds like theres nothing to worry about as I did have a couple of unexpected shutdowns but better safe then sorry (cats being cats and a power button on the top of my case -__-) Also trying to upload my server diags and screenshots, but I keep getting a Error code: -200 Quote Link to comment
itimpi Posted January 3, 2022 Share Posted January 3, 2022 A sync error is one where the contents of a given sector on the parity drive do not agree with the results of the parity calculation applied after reading the corresponding sectors from all the data drives. If running a correcting check the parity drive sector is then overwritten with the results of the parity calculation on the basis that the data drives are to be considered correct. A small number of these are expected if you have had unclean shutdowns. it is normally recommended that scheduled parity checks are set to be none-correcting. The rational is that if a drive is reading unreliably and you have not yet noticed this then you do not want it polluting the contents of the parity drive and thus potentially prejudicing the chance of recovering after a drive failure without data loss. If you get a non-zero result from a scheduled check then you should first make sure you do not have a current hardware issue, and if you are happy then manually run the correcting check. 1 Quote Link to comment
Drackeo Posted January 3, 2022 Author Share Posted January 3, 2022 (edited) 7 hours ago, itimpi said: A sync error is one where.... Finally able to upload my server diags so those are posted below now! Right after posting this I notices something else really weird, all of my drives under the smart data are showing old age and or pre-fail regardless of age. Several are less then a year old and are showing the same as drives that are 3 or 4 years old. Ive ordered a replacement sff8087 to SATA cable for my 9211-8i as ive read that can cause some of this weirdness. EDIT: Also last night I ran an extended health check on all 5 drives and they all passed. So I have 0 idea of whats going on here... Array: Parity: Disk1: Disk2: Disk3: Disk4: togetic-diagnostics-20220102-1827.zip Edited January 3, 2022 by Drackeo Quote Link to comment
Solution JorgeB Posted January 3, 2022 Solution Share Posted January 3, 2022 Dec 23 13:23:14 Togetic emhttpd: unclean shutdown detected Some sync errors are normal after an unclean shutdown 5 minutes ago, Drackeo said: all of my drives under the smart data are showing old age and or pre-fail regardless of age. That's normal, it's only the type of attribute. 1 Quote Link to comment
Drackeo Posted January 3, 2022 Author Share Posted January 3, 2022 So theres nothing to worry about and I can continue with my sync dispite the 4k errors?? Rerun it once completed to make sure theres 0 errors after. Quote Link to comment
JorgeB Posted January 3, 2022 Share Posted January 3, 2022 2 minutes ago, Drackeo said: So theres nothing to worry about and I can continue with my sync dispite the 4k errors?? They need to be corrected, other than that you're fine. Quote Link to comment
Drackeo Posted January 3, 2022 Author Share Posted January 3, 2022 4 minutes ago, JorgeB said: They need to be corrected, other than that you're fine. Thanks for the help and confirmation!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.