Helmi Posted January 24, 2022 Share Posted January 24, 2022 (edited) I'm running this setup: 1 Toshiba 14TB Parity (recently changed from a 6TB) 3 WD 6 TB Array 2 Toshiba 14TB waiting to extend the array. Everything worked fine until I did the following today: - stopped the array, server shutdown - added the additional Toshiba drives to the system - rest untouched - booted the machine, stopped the array to add the additional drive - added the Toshiba drive as 4th drive, started and clearing started That's where I noticed the third WD drive didn't mount. Filesystem type "auto" "fileysystem not mountable". I canceled the clearing and stopped the array to remove the Toshiba drive again but still the WD drive doesn't mount. Not sure what happened there. Any idea how I can approach this. I'm a bit clueless. This drive contain some TB of data. 😕 Thx for helping, Frank yoda-diagnostics-20220124-1934.zip Edited January 24, 2022 by Helmi Added Diagnostics Quote Link to comment
JorgeB Posted January 24, 2022 Share Posted January 24, 2022 Please post the diagnostics (downloaded after array start). Quote Link to comment
Helmi Posted January 24, 2022 Author Share Posted January 24, 2022 Diagnostics added to first post. Array was started in maintenance - good enough? Quote Link to comment
JorgeB Posted January 24, 2022 Share Posted January 24, 2022 22 minutes ago, Helmi said: good enough? No, maintenance mode won't attempt to mount the disks. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.