February 2, 20224 yr So i'm moving all my stuff from a 'gravity rack/stack' (wire shelves from ace) to a proper rack - with a nice 48 port switch and patch panel etc etc etc running a supermicro 24bay hot swap chassis last night i pulled what i thought was an empty bay (i got lazy with my label maker apparently) from my live array - when i realized my mistake i brought my stack down, plugged the drive in - brought everything back up - and now my disk 5 is unhappy and is disabled and all data is running emulated. It is reading the drive and smart health - i'm currently running the extended/full smart test - only 45% complete - my question is once the smart test is complete and (i'm assuming) says there are no issues - how do i go about making disk 5 happy and healthy so i can bring my array back to full strength?? last nigth before kicking off the complete smart test i booted into maintennance mode and ran the check disk and it didn't seem to throw any errors? i'm not sure how to read that report - but it looked mostly similar to a report i ran on a healthy disk what should my next steps be? unfortunately my syslog is swamped with the below (running a couple SAS drives which i believe are causing this) i'm preclearing new drives to replace my sas drives which will hopefully fix the below Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it! Feb 2 08:44:52 Nighthawks kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it!
February 2, 20224 yr 24 minutes ago, SeattleBandit said: how do i go about making disk 5 happy and healthy so i can bring my array back to full strength?? Assuming the emulated disk is mounting and contents look correct: https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself
February 2, 20224 yr Author 29 minutes ago, JorgeB said: Assuming the emulated disk is mounting and contents look correct: https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself boom - simple as that - thanks for the info - once the smart is done i'll just rebuild - thanks
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.