Die_piggy Posted March 3, 2022 Share Posted March 3, 2022 Last night/this morning my server popped up an error and disabled one of my disks as it couldnt be writen to. I disabled the drive, ran an extended SMART test which suggested the drive was OK, and went to re-enable the drive in the array. This evening when I went to add it back to the array the system went into a "read check" and spat out thousands (over 2 million in a few mionutes) of errors on 'disk0' I have since canceled the read check as it seemed to have stalled the system. Am i correct that the most likely problem is a cable/set of cables, or possibly the sas controller or port multiplier? I have been rejigging the server for a few days now, and am not sure which drive is where physically or on the controllers wotbox-diagnostics-20220303-1927.zip Quote Link to comment
Die_piggy Posted March 3, 2022 Author Share Posted March 3, 2022 I currently have the system up, but have disabled any downloading to try and keep the data as static as possible until I hear back from the gurus here Quote Link to comment
JorgeB Posted March 3, 2022 Share Posted March 3, 2022 Looks like a connection problem, check/replace cables/slot on party and try again. Quote Link to comment
Die_piggy Posted March 3, 2022 Author Share Posted March 3, 2022 42 minutes ago, JorgeB said: Looks like a connection problem, check/replace cables/slot on party and try again. Thanks. I just reseated everything and it seems to be doing the read check without errors now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.