phreakedout Posted March 11, 2022 Share Posted March 11, 2022 Hey guys, So I recently went through a procedure to replace/swap one of the parity disks for a much larger disk (8TB->18TB). Everything seems to be running fine afterwards, but decided to do a parity check before going through a similar procedure for the other parity disk. It's taking a good long while, but I'm running docker during this time so this is to be expected. Last I looked I was around 6TB into this and I think I had 1 sync error detected. No big deal. Now I am at ~10.5TB in and its throwing TONS of sync errors. My guess here is that because the parity disks sizes don't match, every bit of data past the 8TB size of the one parity disk can't sync to the smaller disk resulting in a sync error. Am I right in thinking this? unraid-diagnostics-20220311-1805.zip Quote Link to comment
JorgeB Posted March 12, 2022 Share Posted March 12, 2022 8 hours ago, phreakedout said: and I think I had 1 sync error detected. No big deal. That is a big deal, only number of acceptable sync errors is 0. 8 hours ago, phreakedout said: Now I am at ~10.5TB in and its throwing TONS of sync errors. Except for one the sync errors started right at the 8TB mark, this suggests the initial sync or not correct or you did a parity swap, this sometimes results in a pesky bug that doesn't correctly zero out the reaming of the drive past the initial parity size. Quote Link to comment
phreakedout Posted March 12, 2022 Author Share Posted March 12, 2022 Fair enough on both counts. Recommended Fix? Quote Link to comment
Solution JorgeB Posted March 13, 2022 Solution Share Posted March 13, 2022 Run a correcting check then a non correcting one to make result is 0. Quote Link to comment
phreakedout Posted March 14, 2022 Author Share Posted March 14, 2022 Correcting Check in progress. I'll let you know how it goes. Thanks for the advice. Quote Link to comment
phreakedout Posted March 15, 2022 Author Share Posted March 15, 2022 Update: Currently at 7.1TB complete, and the 1 error has been corrected. I suspect I'll soon see a flood of corrected errors as it zeros out the rest of the 18TB disk. So far so good... Quote Link to comment
phreakedout Posted March 16, 2022 Author Share Posted March 16, 2022 As expected it started correcting droves errors at precisely the 8TB mark. Hopefully all goes well. Quote Link to comment
phreakedout Posted March 21, 2022 Author Share Posted March 21, 2022 Yup, this process resolved the issues. Quite some time later, I have completed the correcting check with an insane number of errors corrected (~2 billion). The data is healthy having done a pretty extensive spot check of the files, and also did a second non-correcting check with zero sync errors found. Good stuff. Thanks much @JorgeB 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.