Bron Posted April 8, 2022 Share Posted April 8, 2022 Is there any command before sleep, that will check if any VM is running before executing the sleep mode? (Dynamix S3 Sleep) My server draws at IDLE around 70Watts from the wall and i would like to reduce my powerbill. But however I tried to configure my sleep setting there seems to be only two options for me: the server is running the hole time or he will shut down at the given time (my sleep method, because I use the wakeup schedule on my bios to start the server). I would like to delay my shutdown time when i`m gaming on my VM. After VM shutdown I like to continue the sleep schedule (Wait for VM inactivity before Sleep). Using my current settings it will shutdown perfectly at schedule whether I game on my VM or or not. I thought the "Wait for host inactivity (IP address)" setting will do the trick but it dosnt seem to recognize my VM IP adress. Are my network settings the problem and i have to set them on bond0? For my VM I forwarded the boot drive and i tried the option "Monitor disks outside array" but it dosent help either. When i use the "Wait for array inactivity" setting it doesn`t shutdown at all (independent if i exclude or include the cache.) Thank you for your help, I'm new to this community and please excuse my poor English skills, I'm not a native speaker. Link to comment
JorgeB Posted April 8, 2022 Share Posted April 8, 2022 Please use the existing plugin support thread: Link to comment
Recommended Posts