May 17, 20224 yr After upgrading to 6.10.0 from 6.10-rc8, upon reboot the array won't start as a drive is missing; any help is appreciated. I have a backup of the USB drive. Edited May 18, 20224 yr by luisv
May 17, 20224 yr Author 2 minutes ago, Squid said: Post your diagnostics Updated the original post with the zip file... thanks for the quick reply.
May 18, 20224 yr Author The drives are labeled, so I know which one is drive #3; it's part of my OSD, as all drives are in proper order within the case. I have a backup of the USB key and there's an option to start the array without this drive, so trying to figure out my best options are.... any help is appreciated.
May 18, 20224 yr Community Expert Start array and attach new diagnostics to your NEXT post in this thread
May 18, 20224 yr Author After I calmed down, I performed some basic troubleshooting. I connected a monitor and keyboard, restarted the server and entered the BIOS, the MB has 8 SATA ports and one port was not showing a drive connected to it. So I shut down the system and connected drive 3 to a spare SATA port on the LSi controller card. I turned the server back on, logged in and the array started as it recognized drive 3. I was able to browse disk 3 and open files via the Dynamix File Manager plugin. I also opened some files via Windows explorer that reside on drive 3; the drive seems good to go at the moment. So, it's either a bad SATA port on the MB or a bad cable?? I'm going to leave things alone for a bit to make sure the server is stable. By the way, I just realized the system is 5 years old... boy time flies... it looks like I need to start buying some spare parts as I'm sure other things are going to go... Thanks for the reply... new diagnostics attached. Edited May 19, 20224 yr by luisv
May 18, 20224 yr I just upgraded to 6.10.0 and now I get '404 Not Found' when I try to browse to the dashboard. All docker apps work though so hopefully it wont be something too serious. Going to try and get diagnostics somehow.
May 18, 20224 yr Community Expert 1 hour ago, gsayer said: upgraded to 6.10.0 and now I get '404 Not Found' Not at all the same topic of this other user's thread. You should start your own.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.