Updated to Unraid 6.10 Stable now disk not installed

[ludios]

When i updated to 6.10.0 stable, My is disk 1 now shows as not installed. Everything was working fine before i did the update. I reverted back to 6.9.2 to see if that would change anything. Any ideas what would cause this.

 

Array health report last ran 17 days ago

 

vent: Unraid Status
Subject: Notice [THE-VAULT] - array health report [PASS]
Description: Array has 8 disks (including parity & cache)
Importance: normal

Parity - WDC_WD101EFBX-68B0AN0_VCHM2SNP (sdh) - active 37 C [OK]
Parity 2 - WDC_WD101EFBX-68B0AN0_VCHLV9TP (sdi) - active 33 C [OK]
Disk 1 - WDC_WD60EFRX-68L0BN1_WD-WX12D50LHFPU (sdf) - active 35 C [OK]
Disk 2 - WDC_WD60EFRX-68L0BN1_WD-WX72D507J11J (sdg) - active 35 C [OK]
Disk 3 - WDC_WD40EFRX-68N32N0_WD-WCC7K4HSHKZP (sdd) - active 32 C [OK]
Disk 4 - WDC_WD40EFRX-68N32N0_WD-WCC7K3TREXCY (sde) - active 32 C [OK]
Disk 5 - WDC_WD40EFRX-68N32N0_WD-WCC7K7SP1HPS (sdc) - active 31 C [OK]
Cache - SHGS31-1000GS-2_FSABT00011080B72J (sdb) - active 26 C [OK]

Parity is valid
Last checked on Sun 01 May 2022 10:10:00 PM PDT (7 days ago), finding 0 errors.
Duration: 22 hours, 9 minutes, 59 seconds. Average speed: 125.3 MB/s

 

 

 

 

 the-vault-diagnostics-20220518-2052.zip

[JorgeB]

Unlikely that the update is related, and basically same issue persisting after downgrading confirms that, check/replace/swap cables on disk1, you can also look at the LSI BIOS, if it's not detected there it also won't be in Unraid.

[ludios]

Yeah, the seating the cable seem to work, UNRAID is currently rebuilding that disk as we speak.