ludios Posted May 19, 2022 Share Posted May 19, 2022 When i updated to 6.10.0 stable, My is disk 1 now shows as not installed. Everything was working fine before i did the update. I reverted back to 6.9.2 to see if that would change anything. Any ideas what would cause this. Array health report last ran 17 days ago vent: Unraid Status Subject: Notice [THE-VAULT] - array health report [PASS] Description: Array has 8 disks (including parity & cache) Importance: normal Parity - WDC_WD101EFBX-68B0AN0_VCHM2SNP (sdh) - active 37 C [OK] Parity 2 - WDC_WD101EFBX-68B0AN0_VCHLV9TP (sdi) - active 33 C [OK] Disk 1 - WDC_WD60EFRX-68L0BN1_WD-WX12D50LHFPU (sdf) - active 35 C [OK] Disk 2 - WDC_WD60EFRX-68L0BN1_WD-WX72D507J11J (sdg) - active 35 C [OK] Disk 3 - WDC_WD40EFRX-68N32N0_WD-WCC7K4HSHKZP (sdd) - active 32 C [OK] Disk 4 - WDC_WD40EFRX-68N32N0_WD-WCC7K3TREXCY (sde) - active 32 C [OK] Disk 5 - WDC_WD40EFRX-68N32N0_WD-WCC7K7SP1HPS (sdc) - active 31 C [OK] Cache - SHGS31-1000GS-2_FSABT00011080B72J (sdb) - active 26 C [OK] Parity is valid Last checked on Sun 01 May 2022 10:10:00 PM PDT (7 days ago), finding 0 errors. Duration: 22 hours, 9 minutes, 59 seconds. Average speed: 125.3 MB/s the-vault-diagnostics-20220518-2052.zip Quote Link to comment
JorgeB Posted May 19, 2022 Share Posted May 19, 2022 Unlikely that the update is related, and basically same issue persisting after downgrading confirms that, check/replace/swap cables on disk1, you can also look at the LSI BIOS, if it's not detected there it also won't be in Unraid. Quote Link to comment
Solution ludios Posted May 20, 2022 Author Solution Share Posted May 20, 2022 Yeah, the seating the cable seem to work, UNRAID is currently rebuilding that disk as we speak. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.