Woodpusherghd Posted May 22, 2022 Share Posted May 22, 2022 When I upgraded from 6.92 to 6.10 I was unable to boot my Windows 10 VM. I tried safe mode, same problem. I reverted back to 6.92 and booting into Windows is fine. While on 6.10 I also tried booting into a Windows 7 VM, same problem. I ran the upgrade assistant and everything seemed good to go. Is anyone else experiencing this? Anything else to try? Quote Link to comment
itimpi Posted May 22, 2022 Share Posted May 22, 2022 2 minutes ago, Woodpusherghd said: When I upgraded from 6.92 to 6.10 I was unable to boot my Windows 10 VM. I tried safe mode, same problem. I reverted back to 6.92 and booting into Windows is fine. While on 6.10 I also tried booting into a Windows 7 VM, same problem. I ran the upgrade assistant and everything seemed good to go. Is anyone else experiencing this? Anything else to try? Are you passing any hardware through to the VM? If so it is worth checking to see whether the Id's for it changed on 6,10,0 as it has a much newer Linux kernel. Quote Link to comment
Woodpusherghd Posted May 22, 2022 Author Share Posted May 22, 2022 I'm passing through a video card (amd), keyboard and mouse. What's the best way to check IDs? Taking a screen shot of system devices on 6.9.2 and comparing? If they changed what the procedure to go forward on 6.10? Quote Link to comment
itimpi Posted May 22, 2022 Share Posted May 22, 2022 28 minutes ago, Woodpusherghd said: I'm passing through a video card (amd), keyboard and mouse. What's the best way to check IDs? Taking a screen shot of system devices on 6.9.2 and comparing? If they changed what the procedure to go forward on 6.10? You could simply try removing all the current vfio bindings and then redoing them? Quote Link to comment
utentep2p Posted May 22, 2022 Share Posted May 22, 2022 (edited) Same Issue here after update to 6.10.0 and 6.10.1 VM stuck without BR0, I try to add a new VM with some disk... nothing some stuck, if I add a VNC card BR0 and ethernet go up otherwise BR0 and VIRTIO-NET stuck and don't start.. IOMMU group 22:[10de:1c82] 08:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050 Ti] (rev a1) [10de:0fb9] 08:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio Controller (rev a1) <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x08' slot='0x00' function='0x0'/> </source> <rom file='/mnt/user/vbios/gpu GTX1050Ti.rom'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0' multifunction='on'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x4'/> </source> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x1'/> </hostdev> but if use VNC (strange) all BUS and SLOT are online and ready?!?!?!?!?! -vnc 0.0.0.0:0,websocket=5700,audiodev=audio1 \ -k it \ -device qxl-vga,id=video0,max_outputs=1,ram_size=67108864,vram_size=67108864,vram64_size_mb=0,vgamem_mb=16,bus=pci.7,addr=0x1 \ -device 'vfio-pci,host=0000:08:00.0,id=hostdev0,bus=pci.4,addr=0x0,romfile=/mnt/user/vbios/gpu GTX1050Ti.rom' \ -device vfio-pci,host=0000:08:00.1,id=hostdev1,bus=pci.5,addr=0x0 \ -device vfio-pci,host=0000:0a:00.4,id=hostdev2,bus=pci.6,addr=0x0 \ -device usb-host,hostdevice=/dev/bus/usb/001/002,id=hostdev3,bus=usb.0,port=2 \ -device usb-host,hostdevice=/dev/bus/usb/005/002,id=hostdev4,bus=usb.0,port=3 \ -device usb-host,hostdevice=/dev/bus/usb/001/003,id=hostdev5,bus=usb.0,port=4 \ 2022-05-22T12:19:43.121072Z qemu-system-x86_64: -device vfio-pci,host=0000:08:00.0,id=hostdev0,bus=pci.3,addr=0x0,romfile=/mnt/disk1/vbios/gpu GTX1050Ti.rom: Failed to mmap 0000:08:00.0 BAR 1. Performance may be slow 2022-05-22T12:19:43.161892Z qemu-system-x86_64: vfio: Cannot reset device 0000:0a:00.4, depends on group 24 which is not owned. 2022-05-22T12:19:43.174037Z qemu-system-x86_64: vfio: Cannot reset device 0000:0a:00.4, depends on group 24 which is not owned. Edited May 22, 2022 by utentep2p Quote Link to comment
Driftall Posted May 23, 2022 Share Posted May 23, 2022 Also hitting the same issue, VNC has to be enabled and set as the primary display adapter for the VM to boot. Quote Link to comment
Zorlofe Posted May 23, 2022 Share Posted May 23, 2022 I have VNC set on mine and can't connect to the VM via VNC at all. It seems like the VM is running but VNC is not. Quote Link to comment
utentep2p Posted May 23, 2022 Share Posted May 23, 2022 (edited) 45 minutes ago, Zorlofe said: I have VNC set on mine and can't connect to the VM via VNC at all. It seems like the VM is running but VNC is not. I try again today.. VNC + secondary GPU as NVIDIA windows ok VM start windows recognize Video Card VNC + secondary GPU as NVIDIA Ubunto ok VM start and recognize Video Card noVNC only one primary GPU as NVIDIA KO network don't start (Windows) noVNC only one primary GPU as NVIDIA KO network don't start (Ubuntu) bye, bye passtrought at all!! Unraid OS (default) kernel /bzimage append vfio_iommu_type1.allow_unsafe_interrupts=1 acpi_enforce_resources=lax initrd=/bzroot Unraid OS GUI Mode kernel /bzimage append vfio_iommu_type1.allow_unsafe_interrupts=1 acpi_enforce_resources=lax initrd=/bzroot,/bzroot-gui Edited May 23, 2022 by utentep2p Quote Link to comment
utentep2p Posted May 23, 2022 Share Posted May 23, 2022 6 hours ago, Driftall said: Also hitting the same issue, VNC has to be enabled and set as the primary display adapter for the VM to boot. Gigabyte Technology Co., Ltd. X570 I AORUS PRO WIFI BIOS: American Megatrends International, LLC. Version F36c. Dated: 05/12/2022 CPU: AMD Ryzen 3 3100 4-Core @ 3600 MHz HVM: Enabled IOMMU: Enabled Network: eth0: 1000 Mbps, full duplex, mtu 1500 Kernel: Linux 5.15.40-Unraid x86_64 Quote Link to comment
Woodpusherghd Posted May 28, 2022 Author Share Posted May 28, 2022 Still unable to pass through my AMD HD 5450 gpu. Windows boots into a blank screen. This is with version 6.10.2. I've attached the diagnostic file. The VM can only be accessed with VNC. I never had problems with prior versions of unRaid. Any thoughts? tower-diagnostics-20220528-0911.zip Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.