May 30, 20224 yr Hello, I'm a first time user of Unraid, just setting up my first build with a trial license. I have the boot usb drive plugged into a header on the motherboard, I have a USB hard drive plugged into the motherboard externally, and an NVME drive that all show up and I was able to configure them in my array. I also have two drives connected over SATA (one sandisk SSD and one WD Red HDD) that do not show up in Unraid. They do however both. show up in the BIOS. I searched online, and found suggestions to disable VT-d/IOMMU in the BIOS, which I tried, but that didn't fix the issue.
May 30, 20224 yr Solution 00:17.0 RAID bus controller [0104]: Intel Corporation Device [8086:43de] (rev 11) DeviceName: Onboard - Other Subsystem: ASUSTeK Computer Inc. Device [1043:8694] No SATA controller being detected, only this, see if there's an option in the BIOS to change it to AHCI/SATA
May 30, 20224 yr Author That was the issue! It was set to Intel QuickSync, I changed it to AHCI and both of the other drives showed up. Thanks! Edited May 30, 20224 yr by oro Hit send too early
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.