HDT Posted June 5, 2022 Share Posted June 5, 2022 (edited) Hello!  I did a graceful SHUTDOWN from the web app on my UNRAID server to add a new HDD. After rebooting the server back on, these things happened: All plugins missed from server. 3 of my shares have a yellow/orange ( !🔺) icon next to them. When I hover over the icon, it shows: SOME OR ALL FILES UNPROTECTED   Any ideas? Diagnostics attached. media-unraid-diagnostics-20220604-1904.zip Edited June 5, 2022 by HDT Quote Link to comment
itimpi Posted June 5, 2022 Share Posted June 5, 2022 You are likely to get better informed feedback if you post your system’s diagnostics zip file so we can see what is going on. Quote Link to comment
HDT Posted June 5, 2022 Author Share Posted June 5, 2022 1 minute ago, itimpi said: You are likely to get better informed feedback if you post your system’s diagnostics zip file so we can see what is going on.  It's already attached, thank you! Quote Link to comment
itimpi Posted June 5, 2022 Share Posted June 5, 2022 According to your diagnostics there are problems with the flash drive and this is almost certainly the root cause of your problem. Â Do you have a backup? Â Quote Link to comment
HDT Posted June 6, 2022 Author Share Posted June 6, 2022 On 6/5/2022 at 1:13 AM, itimpi said: According to your diagnostics there are problems with the flash drive and this is almost certainly the root cause of your problem. Â Do you have a backup? Â Â Â I do not, what should I do? Â The stick that I'm using now is this: 1. Samsung bar plus 32 GB Â I got it following the advice from this thread: Â Quote Link to comment
itimpi Posted June 6, 2022 Share Posted June 6, 2022 2 hours ago, HDT said: I do not, what should I do? If you do not know your drive assignments then this might help. Quote Link to comment
HDT Posted June 6, 2022 Author Share Posted June 6, 2022 (edited) 34 minutes ago, itimpi said: If you do not know your drive assignments then this might help. So, I should wipe the USB flash drive and use the creator app to make a fresh UNRAID bootable and build everything again? Edited June 6, 2022 by HDT Quote Link to comment
itimpi Posted June 6, 2022 Share Posted June 6, 2022 1 hour ago, HDT said: So, I should wipe the USB flash drive and use the creator app to make a fresh UNRAID bootable and build everything again? Depends on whether you can read the current contents of the flash drive when plugged into a PC or Mac.  If you can you can simply copy it’s contents at that point as a backup.  All your settings (and key file) are in the ‘config’ folder on the flash dtive.  That should be the first thing to try.  The results might give us an idea of the state of your flash dtive. Quote Link to comment
HDT Posted June 7, 2022 Author Share Posted June 7, 2022 (edited) 2 hours ago, itimpi said: Depends on whether you can read the current contents of the flash drive when plugged into a PC or Mac.  If you can you can simply copy it’s contents at that point as a backup.  All your settings (and key file) are in the ‘config’ folder on the flash dtive.  That should be the first thing to try.  The results might give us an idea of the state of your flash dtive.  The contents of the original Samsung USB flash drive is readable. However, I cannot copy it onto a new USB flash drive because the config folder is 50.1 GB and the new drive is only 8GB:  The original Samsung USB flash drive is only 32 GB. It looks like the PLUGINS folder was corrupted?   I tried copying everything except for the PLUGINS folder, but got read errors on these 13 files: Edited June 7, 2022 by HDT Quote Link to comment
Solution itimpi Posted June 7, 2022 Solution Share Posted June 7, 2022 Definitely sounds like major problems on the flash drive. Â I suspect it Is failing but the only way to be sure will be to try rewriting it. Â The config folder should only be a few hundred Mb so there is definitely something seriously wrong. Â Your disk configuration is in the config/super.dat file so it looks like you may have managed to copy that OK. Â Hard to be certain as it is not human readable. Â You also seem to have copied the .key licence file OK? Â Looks like most of the other default configuration files are gone. Â Sounds like you have little choice except to try creating a new flash drive and reconfiguring your Unraid server. Â Copying across the super.dat file (if it is not corrupt) and the licence .key file will hopefully slightly reduce the amount of re-configuration needed. Â You want to make sure that going forward you have a backup of the flash drive so you can quickly recover if a flash drive fails. Â You can take a manual backup of your flash drive at any time by clicking on it on the Main tab and selecting the Backup option. Â Â You can have automated backups to the cloud on Limetech servers if you install the MyServers plugin or locally using the CA Appdata backup plugin. 1 Quote Link to comment
HDT Posted June 8, 2022 Author Share Posted June 8, 2022 On 6/6/2022 at 11:11 PM, itimpi said:  You want to make sure that going forward you have a backup of the flash drive so you can quickly recover if a flash drive fails.  You can take a manual backup of your flash drive at any time by clicking on it on the Main tab and selecting the Backup option.   You can have automated backups to the cloud on Limetech servers if you install the MyServers plugin or locally using the CA Appdata backup plugin.   Thank you for the recommendations! I will set up automatic backups of the Flash USB drive.  BTW... CA Auto Update Applications says: Quote NOTE: USB Backup is deprecated on Unraid version 6.9.0 It is advised to use the Unraid.net plugin instead  Quote Link to comment
itimpi Posted June 8, 2022 Share Posted June 8, 2022 1 hour ago, HDT said:  Thank you for the recommendations! I will set up automatic backups of the Flash USB drive.  BTW... CA Auto Update Applications says:  Yes.  It still works, but the cloud backup is now the recommended option. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.