June 26, 20224 yr Hi guys, I have just upgraded my UnRaid server, moving from a good old HP N54L to something more powerful as below. Its been running for 4 days, testing windows 11 VM and backing up my Syno server, nothing crazy. Even though there were some minor issues but luckily I got it fixed (eg: fastboot), until this morning, I could not connected to my UnRaid, I powered it up and it shutdown again. Turns out that the server keep looping for a Shutdown script etc/rc.d/rc.0 right after I switched on. I have 90s before every shut, what should i do about it, does anyone have any ideas or had similar issues before? Thanks! UnRaid: 6.10.3 Docker: Krusader Syncthing Jellyfin (Installed yesterday) Spec CPU: Intel 12th Gen 12600K (770 UHD) Motherboard: Asus TUF Gamming B660M with WiFi and BT (D4) Ram: Adata XPG DDR 3200 16GB X4 Graphic: waiting Nvidia 4000 series PSU: Antec NE750G 80 Plus NVME 1: Samsung 970 Pro 1TB (Cache) NVME 2: Old Samsung 256GB (VM-Gaming) Case: Fractal Node 804 HDDs: Parity: Toshiba MG06 8T Enterprise X1 Data Toshiba DT01ACA300 3TB X4Toshiba MG05 8T Enterprise X1 UPS: APC BE700G-UK (NUT mode, where my Syno will send a clean shutdown packet to UnRaid if it detects a power failure) Here are some corps, no notification or warning whatsoever Edited June 28, 20224 yr by a24425311
June 26, 20224 yr Author Able to boot up without shutdown in Safe Mode, attached with diagnostics file unraid-diagnostics-20220626-1157.zip
June 26, 20224 yr Community Expert If it boots in Safe Mode then that means that the Shutdown is being initiated by a plugin you have installed. It will be a process of elimination to work out which one. You should also set up the syslog server to get some log information that survives a reboot as that could also give a clue.
June 26, 20224 yr Author 44 minutes ago, itimpi said: If it boots in Safe Mode then that means that the Shutdown is being initiated by a plugin you have installed. It will be a process of elimination to work out which one. You should also set up the syslog server to get some log information that survives a reboot as that could also give a clue. Thanks, Syslog attached. yesterday i installed INTEL GPU TOP and GPU stats for jellyfin server, don't know if it changed some of the setting. syslog Edited June 26, 20224 yr by a24425311
June 26, 20224 yr Community Expert Cannot see what initiated the shutdown. I am afraid it looks like you are going to have to do it the hard way and try disabling/enabling plugins until you find the culprit. If investigating which plugin caused the problem it is worth knowing that if you rename any of the .plg files in the config folder to have a different file extension and then reboot that plugin will not load. Naming it back and rebooting will enable it again.
June 26, 20224 yr Author 1 hour ago, itimpi said: Cannot see what initiated the shutdown. I am afraid it looks like you are going to have to do it the hard way and try disabling/enabling plugins until you find the culprit. If investigating which plugin caused the problem it is worth knowing that if you rename any of the .plg files in the config folder to have a different file extension and then reboot that plugin will not load. Naming it back and rebooting will enable it again. Thanks now i believe it was caused by gpustat.plg, let me remove it and do a fresh install see if it fixes the problem.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.