July 8, 20223 yr Evening everyone. I tried to connect monitor to my unRAID to try VM Machine. During this process I rebooted a machine some times. I set up VT in the BIOS also. After these operations I can not to start Array in both modes normal / maintenance. When I click start nothing happens. Please help tower-diagnostics-20220708-2233.zip Edited July 8, 20223 yr by bombs1ght
July 8, 20223 yr Community Expert emhttp is segfaulting, please try rebooting in safe mode, if still the same post new diags.
July 8, 20223 yr Author 16 minutes ago, JorgeB said: emhttp is segfaulting, please try rebooting in safe mode, if still the same post new diags. The same situation. Also after trying to start Array I have not any buttons except reboot and shutdown (see photo please) tower-diagnostics-20220708-2313.zip
July 8, 20223 yr Author After a few reboots/shutdowns, I was able to run array. But still something is wrong. When I go to the server and try to do something, it always redirects me to the main tab. As if the array is constantly stopping and starting, sometimes the page itself is updated ten times a second. See enclosed diagnostic please. P.s.: I feel if I stop the Array or reboot, will not able to start Array again, like it was when I created a topic. tower-diagnostics-20220708-2355.zip Edited July 8, 20223 yr by bombs1ght
July 9, 20223 yr Community Expert Array did start in safe mode, but not all services started and there were still some strange errors, last diags look mostly OK, except some wrong csrf errors.
July 9, 20223 yr Author 3 hours ago, JorgeB said: Array did start in safe mode, but not all services started and there were still some strange errors, last diags look mostly OK, except some wrong csrf errors. I turned off server for the night. After that I can not to start Array again, nothing happen after click in the Array start button. I've enclosed a diagnostic again. What can I do to return server in the work status? I have done backup some days ago via CA RESTORE/BACKUP APPDATA. Can it help me? tower-diagnostics-20220709-1313.zip
July 9, 20223 yr Community Expert Those strange errors are back, you might have a flash drive or install problem, try recreating it.
July 9, 20223 yr Author During I am learning how to recreate flash with unRAID and save all settings I have done a small movie of troubles with Array. It is a Main page, I did do nothing. https://www.veed.io/view/c45c5b94-f8da-4124-ab1c-f4b910bfee11?sharingWidget=true screen-20220709-214614.mp4
July 9, 20223 yr Author 11 hours ago, JorgeB said: Those strange errors are back, you might have a flash drive or install problem, try recreating it. I have recreated a flash drive (via backup .zip). But have the some problem. Array constantly stop and start, stop and srart tower-diagnostics-20220710-0122.zip Edited July 9, 20223 yr by bombs1ght
July 10, 20223 yr Community Expert Your config/go file tries to start up the Unraid management system (emhttpd) twice. This is I suspect the source of your symptoms.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.