gplayer Posted July 13, 2022 Share Posted July 13, 2022 (edited) I have 3 disks, the capacities are 4t, 8t, 16t respectively, and the file systems are all xfs. 4t and 8t can be added to the unraid disk array. But 16t cannot . I can manually mount it on the command line .The 16t hard drive is full of data, so I want to join the unraid disk array without reformatting. Below is the display result after fdisk -l: Disk /dev/sdc: 14.55 TiB, 16000900661248 bytes, 31251759104 sectors Disk model: WDC WUH721816AL Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: gpt Disk identifier: 70DDD2F2-5734-45EB-B33D-24070E8244F8 Device Start End Sectors Size Type /dev/sdc1 2048 31251757055 31251755008 14.6T Linux filesystem Edited July 13, 2022 by gplayer Quote Link to comment
Solution JorgeB Posted July 13, 2022 Solution Share Posted July 13, 2022 14 minutes ago, gplayer said: so I want to join the unraid disk array without reformatting. That's not possible, Unraid requires a specific partition layout and signature, you can mount the disk with UD plugin and copy the data to another disk(s) on the array. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.