TML Posted August 2, 2022 Share Posted August 2, 2022 Running unRAID 6.10.3, had a power outage event which exceeded UPS uptime. When I got home and restored power, unRAID came back up but appears to be in a confused state. The array is started, I can access shares from other machines, but the Web GUI thinks the array is stopped and the configuration is stale and will not allow me to perform any array management. Diagnostics attached. juggernaut-diagnostics-20220802-1704.zip Quote Link to comment
trurl Posted August 3, 2022 Share Posted August 3, 2022 2 hours ago, TML said: a power outage event which exceeded UPS uptime You should configure UPS to shutdown after a short time without power. The purpose of UPS isn't to allow your server to run for a long time without power. The purpose of UPS is to allow your server to run if power is off for a very brief time, and to allow your server to shutdown cleanly if your power is off for a slightly longer time. You don't want to drain your UPS battery, and you don't want to restart your server on an UPS that doesn't have enough power to allow clean shutdown. Haven't looked at diagnostics yet. Close all browser tabs accessing your server on every device, and access it from a new browser session. See if that makes any difference. Quote Link to comment
trurl Posted August 3, 2022 Share Posted August 3, 2022 Unrelated, but you really should consider dual parity with that many array disks. Quote Link to comment
TML Posted August 3, 2022 Author Share Posted August 3, 2022 Closed all browsers, started a new Firefox profile and logged in, no change. I had two 14TB parity drives (you can still see them attached in the Unassigned Devices section); I just switched over to 16TB parity drives, one of them finished building and is assigned as parity, the other was building when the power outage happened. I haven't yet figured out a way to automate the shutdown of my unRAID when it's on UPS, but I appreciate the advice. Quote Link to comment
Solution JorgeB Posted August 3, 2022 Solution Share Posted August 3, 2022 Try a different browser other than Firefox, if still the same please try rebooting in safe mode, if you get the stale config error post new diags. Quote Link to comment
TML Posted August 4, 2022 Author Share Posted August 4, 2022 Tried Chrome, same problem. I will have to schedule some downtime later this month to see if it recovers on boot. Thanks for looking at it. Quote Link to comment
TML Posted August 5, 2022 Author Share Posted August 5, 2022 Rebooting the machine solved it. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.