fatmaddin2000 Posted August 3, 2022 Share Posted August 3, 2022 Hello! I have quite a big Unraid Server with about 26 Disks and 2 Cache Pools. At the moment I am in the process of replacing disks with errors and used Unbalance to free the drives. During the process I thought it is a good Idea to reboot the server. But the array wasn't starting anymore. Fix common problems said that one ssd of one pool had errors and I copied of the data of the pool like described in the linked thread to one of the disks. After that I tried to start the array without the failing ssd from the pool, because I thought it will be no problem because it's a raid pool. But it's stated that the ssd is still missing, even I put it back to the cache pool. But still the array is not starting. I attached the diagnostics. Maybe somene has an Idea how to start the array again. I also consider to do a new config, because I have all the appdata and so on on one of the drives (from my rescue copy) I have never had done this. When I do a new config, how do I get the Dockers back running, because of redoing the pools. Hope you can help. Thanks. Martin anderson-diagnostics-20220803-1234.zip Quote Link to comment
JorgeB Posted August 3, 2022 Share Posted August 3, 2022 Aug 3 12:22:46 Anderson root: WARNING: adding device /dev/sdak1 gen 3145 but found an existing device /dev/sdj1 gen 3159 Sdj is disk9, sdak is currently unassigned, wipe or disconnect sdak since it appears to be conflicting with the pool, then please reboot and post new diags after array start. Quote Link to comment
JorgeB Posted August 3, 2022 Share Posted August 3, 2022 Forgot to mention, likely sdak was old disk9 and it was replaced, so it's the same filesystem, but older generation. Quote Link to comment
fatmaddin2000 Posted August 3, 2022 Author Share Posted August 3, 2022 Thanks Jorge! True! I cleared sdak and the array has started. Parity Check started also. I still get following message: Cache pool BTRFS missing device(s) 1659525782 CT2000MX500SSD1_1818E13A37C4 (sdu) I see reads from the cache pool where the device is missing. But no reads nor writes to sdu Unraid put new appdata and system folders on disk5, which was subject to get changed in the future. I attached the new diagnostics. anderson-diagnostics-20220803-1320.zip Quote Link to comment
JorgeB Posted August 3, 2022 Share Posted August 3, 2022 There wasn't a valid btrfs filesystem in sdu, suggesting the device was wiped at some point, because of that Unraid if first deleting the missing device, I do see a lot of these errors logged: Aug 3 13:13:34 Anderson kernel: BTRFS warning (device sds1): direct IO failed ino 119162 rw 0,0 sector 0xfe1a280 len 4096 err no 10 Aug 3 13:13:34 Anderson kernel: BTRFS warning (device sds1): direct IO failed ino 119162 rw 0,0 sector 0xfe1a288 len 4096 err no 10 Aug 3 13:13:34 Anderson kernel: BTRFS warning (device sds1): direct IO failed ino 119162 rw 0,0 sector 0xfe1a290 len 4096 err no 10 Not sure what these mean exactly but while the balance is going lets see if it finishes. Quote Link to comment
fatmaddin2000 Posted August 3, 2022 Author Share Posted August 3, 2022 Thanks again, Jorge! I will wait for parity and comming back. Thanks! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.