Array not starting upon reboot - unRAID Pro license - 6.10.3

[joshbgosh10592]

I just updated from 6.10.0 to 6.10.3 immediately after doing a "shrink array" to replace an empty data drive with a much larger drive. I did select the "Parity is already valid" checkbox when I performed it

Now, however, when I reboot the server, the array doesn't automatically start...

The server is assigned a static IP address via it's NIC, and I have a somewhat complex NIC setup with two bonded (802.3ad) 10Gb NICs, two bonded (also 802.3ad) 1Gb NICs, as well as two other independent NICs with their own IPs.

I'm wondering if the license check is happening before the NICs are activated? This wasn't an issue with any other version of unRAID though and I've had this setup since I believe 6.8.

[JorgeB]

Unraid doesn't need internet to check the license, except for trial keys, and you still would have GUI access, you can try renaming /config/network.cfg and use the default DHCP setting to see if it works.