will1498 Posted August 26, 2022 Share Posted August 26, 2022 Hello all, I recently upgraded my motherboard, cpu, ram and on initial boot (1 of 4) of my 6tb white label drives wasn't showing up, but I figured no biggy I wanted to replace it with a larger drive anyways. I plug in 8 of my drives through an IT flashed HBA h310 card https://www.ebay.com/itm/164671032513 So I shutdown preparing to add my new drive to the config to replace it but another of similar 6tb drive stopped showing up after reboot. I have 4x6tb white labels that I've been using for almost a year. Suddenly two aren't working. So I start troubleshooting. 1. swap cables 2. swap psu cables 3. tried the 3.3v tape pin solution for the two drives. https://www.instructables.com/How-to-Fix-the-33V-Pin-Issue-in-White-Label-Disks-/ 4. tape b6 on my HBA card. http://yannickdekoeijer.blogspot.com/2012/04/modding-dell-perc-6-sas-raidcontroller.html No matter where I plug in these two specific drives they do not show. As an additional t/s step I plugged one into the motherboard directly and boom it shows up. But its not recognized as the same drive. Detects same serial but it'll still require me to make a new config to make it work. My concerns are how do I make sure I dont lose 12tb (2x6tb) worth of data? What the heck is going on with my setup? tower-diagnostics-20220826-0848.zip Quote Link to comment
Solution JorgeB Posted August 26, 2022 Solution Share Posted August 26, 2022 LSI is flashed to raid mode, you should flash it to IT mode, note that it will require a new config because all drives identification will change. Quote Link to comment
will1498 Posted August 26, 2022 Author Share Posted August 26, 2022 Interesting.. Is that something that just happens? Im pretty sure it used to be in IT mode on my last system. Another update: Now another drive isnt showing up and its not a white label. Quote Link to comment
will1498 Posted August 26, 2022 Author Share Posted August 26, 2022 (edited) 6 hours ago, JorgeB said: LSI is flashed to raid mode, you should flash it to IT mode, note that it will require a new config because all drives identification will change. I followed these instructions and flashed according to the model of the card. https://fohdeesha.com/docs/perc.html Everything came back! Had to setup new config and we're back to normal! Edited August 26, 2022 by will1498 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.