August 29, 20223 yr So i had a motherboard failure, USBs and other parts of the board failed. I replaced the board and was able to get unraid to boot back up, however half my drives were listed as un-mountable. I was able to resolve the issue by running the xfs_repair in maintenance mode on 3 of the drives and looks like they fully recovered and are now mounted. However, i have one drive that will not pass the xfs_repair saying 'Phase 1 - find and verify superblock... couldn't verify primary superblock - not enough secondary superblocks with matching geometry !!!'. When i run the smart test the drive passes so it seems. attached is the log file , disk 7 is the problem. if anyone can tell me if there is something wrong or a way to fix.. THANKS! mattos-diagnostics-20220828-1954.zip
August 29, 20223 yr Community Expert Try updating to v6.11.0-rc4 and running xfs_repair again, it comes with newer xfsprogs.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.