MustardTiger Posted August 30, 2022 Share Posted August 30, 2022 Hi everyone. One of my drives is benchmarking quite differently to the others, and I'm not sure why. The drive in question is a shucked WD drive (WD40EMAZ). I'm not sure whether it's SMR or not, but all my other drives are CMR/PMR. Its SMART status looks fine, although it say's 'TRIM available', so does this means it's an SMR? And could that cause this behaviour of speeding up towards the end of the disk? Many thanks in advance! Quote Link to comment
JorgeB Posted August 30, 2022 Share Posted August 30, 2022 It's normal with some SMR drives, it will show correct speed once the drive is fully written once. 1 Quote Link to comment
MustardTiger Posted August 30, 2022 Author Share Posted August 30, 2022 3 minutes ago, JorgeB said: It's normal with some SMR drives, it will show correct speed once the drive is fully written once. Ah ok, thank you. Do you mind elaborating a bit on what you mean by "once the drive is fully written once"? Do you mean once the drive is filled up 100% with data at one time, or as in once each sector has been written to since new? The disk has been powered on for 2+ years total, and is currently about 95% full. Quote Link to comment
JorgeB Posted August 30, 2022 Share Posted August 30, 2022 2 minutes ago, chrisjwalker said: or as in once each sector has been written to since new? This, any sectors that have never been written are known by the firmware, so the disk returns zeros directly from the controller, it doesn't read the disk surface, hence the higher speeds. 1 Quote Link to comment
MustardTiger Posted August 31, 2022 Author Share Posted August 31, 2022 16 hours ago, JorgeB said: This, any sectors that have never been written are known by the firmware, so the disk returns zeros directly from the controller, it doesn't read the disk surface, hence the higher speeds. Ok cool, thanks for the explanation, much appreciated! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.