thomps84 Posted September 9, 2022 Share Posted September 9, 2022 (edited) Greetings! This is my first time using Unraid and I'm seeing some disk issues. I ordered 10 Used HDD's from the same Ebay Vendor. They are in a refurbished Dell T620. The disks are connecting to a H710 controller that I flashed to IT mode. I've attached the diagnostics from UNRAID. Hopefully I'm just missing something simple. I see similar errors to what is below for 7 of the 10 disks so far. One seem to be running the preclear without any issues. I had initially added the disks to an array but the Parity-Sync quickly shot up to 35+ days(3tb drives 2xparity) . I canceled that and decided to try and run the pre clear on each disk. The smart check shows that the disks are "healthy" but not sure that its correct. Sep 09 10:49:25 preclear_disk_Z1Y24MWY0000W506GQ7S_5211: Pre-Read: dd output: dd: error reading '/dev/sdh': Input/output errorSep 09 10:49:25 preclear_disk_Z1Y24MWY0000W506GQ7S_5211: Pre-Read: dd output: 10+0 records inSep 09 10:49:25 preclear_disk_Z1Y24MWY0000W506GQ7S_5211: Pre-Read: dd output: 10+0 records outSep 09 10:49:25 preclear_disk_Z1Y24MWY0000W506GQ7S_5211: Pre-Read: dd output: 20971520 bytes (21 MB, 20 MiB) copied, 162.022 s, 129 kB/sSep 09 10:49:25 preclear_disk_Z1Y24MWY0000W506GQ7S_5211: Pre-Read: dd output: dd: error reading '/dev/sdh': Input/output error I appreciate any help/suggestions Patrick tower-diagnostics-20220909-1345.zip Edited September 14, 2022 by thomps84 Spelling, Grammar , Updated info Quote Link to comment
Solution JorgeB Posted September 10, 2022 Solution Share Posted September 10, 2022 Formatted with type 2 protection You need to remove this from the disks, more info below. https://forums.unraid.net/topic/93432-parity-disk-read-errors/?do=findComment&comment=864078 https://forums.unraid.net/topic/110835-help-with-a-sas-drive/ Quote Link to comment
thomps84 Posted September 10, 2022 Author Share Posted September 10, 2022 Jorge- thank you sir! I found the link to the tales from IT post and will give that a shot! Will update if it works. Where did you find the Formatted with type 2 protection info in the diagnostics so I know where to look in the future Quote Link to comment
JorgeB Posted September 10, 2022 Share Posted September 10, 2022 16 minutes ago, thomps84 said: Where did you find the Formatted with type 2 protection info in the diagnostics so I know where to look in the future The syslog errors suggested that: Quote Sep 9 11:25:28 Tower kernel: blk_update_request: protection error, dev sde, sector 32 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 and you can confirm by looking at the SMART reports for the drives. Quote Link to comment
thomps84 Posted September 14, 2022 Author Share Posted September 14, 2022 Thank you! That did the trick. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.