hndakd Posted September 26, 2022 Share Posted September 26, 2022 I had a power loss 2 days ago. I manually restarted the box and everything came up no issues. Yesterday I began receiving error emails about reads. I stopped the array and dockers and began a check. As soon as the check stopped none of the drives are visible that are attached to the hba. I had over 1 million read errors. The machine is on a ups so I didn't question a clean shutdown/parity check not happening after I started it back up. I will provide a log when I get home this afternoon. More than a little frustrated lol. Right now the box is turned off. I plan on tacking a drive and connecting it directly to the motherboard after checking to make sure that everything is seated properly. I recently swapped out a bunch of stuff and moved from one chassis to another, but it has been running fine ever since I first turned it on. Quote Link to comment
JorgeB Posted September 26, 2022 Share Posted September 26, 2022 Please post the diagnostics. Quote Link to comment
hndakd Posted September 26, 2022 Author Share Posted September 26, 2022 Sorry gotta work I havent touched it at yet, so still at the same point as previosly described. All and any help is greatly appreciated boss-diagnostics-20220926-1501.zip Quote Link to comment
JorgeB Posted September 26, 2022 Share Posted September 26, 2022 Which is the HBA you're using? Not seeing any in the device list. Quote Link to comment
hndakd Posted September 26, 2022 Author Share Posted September 26, 2022 LSI 6Gbps SAS HBA LSI 9211-8i Im concerned that this thing has failed or maybe a cable. This all happened within an hour of receiving the first notice of read errors. My plan is to take a drive out and directly connect it to the mobo to see if it sees it then. I have that hba and supermicro BPN-SAS2-846EL1 I dont really know how to trouble shoot the backplane only because of the connectors Quote Link to comment
hndakd Posted September 26, 2022 Author Share Posted September 26, 2022 I believe the hba is dead. I put a hdd in sata port immediately came up in bios and unraid. The card is not visible in bios, and its not warm at wall while system is running. I have order replacement card Quote Link to comment
JorgeB Posted September 27, 2022 Share Posted September 27, 2022 Yes, looks like the HBA is the problem, it wasn't being detected by Linux, you can try a different slot or PC if you have one to confirm. Quote Link to comment
hndakd Posted September 27, 2022 Author Share Posted September 27, 2022 I tried every slot in the mobo. After talking to vendor, and doing some tests it has a blown fuse. I'm hopeful that a replacement will fix this right up. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.