Lars92 Posted November 15, 2022 Share Posted November 15, 2022 Hello to the round, I have the following problems: 1st problem: The following disk (WDC_WD20EFAX-68B2RN1_WD-WX92A51AEP79 - 2 TB (sdj) from the array is disabled since few days. SMART values seem to be ok. After I removed the disk from the array and added it again, the rebuild process starts. The next day the same game. 2nd problem: I have a cache pool consisting of 2 SSDs. These sit in a removable frame with hotswap bays (Icy Dock ToughArmor MB604SPO-B). It runs flawlessly for the first few hours. But after a while, the LEDs of the disks flicker and the SSDs are no longer accessible in unraid, although everything is "green". Furthermore, the temperature of the SSDs is no longer displayed. If I then stop the array, the SSDs are again accessible or administrable and the temperature is also displayed again. Even after a reboot, the SSDs run "clean" for the time being. I hope someone can help me. I am already in despair and have so far put a lot of time, without success. Diagnostic file is attached yesterday and today. Thankyou for your help! lars-server-diagnostics-20221115-1921.zip lars-server-diagnostics-20221114-1855.zip Quote Link to comment
Lars92 Posted November 15, 2022 Author Share Posted November 15, 2022 rebooted system and one missing SSD came back. (File uploaded) lars-server-diagnostics-20221115-2116.zip Quote Link to comment
JorgeB Posted November 16, 2022 Share Posted November 16, 2022 Looks more like power/connection issues with multiple devices, check/replace cables or PSU. Quote Link to comment
Lars92 Posted November 16, 2022 Author Share Posted November 16, 2022 Quick update: I just installed proxmox in Raid 1 on the SSDs with btrfs and all is running flawless... I didn't change anything on hardware level before so maybe a driver/firmware issue there. I will continue my tests and give an update. Cheers Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.