November 23, 20223 yr i'm a noob so i hope you have a long patience answering my queries. Is the Disk3 (dying drive) being rebuild? when i try to put the new drive (unassigned disk) It wont turn the array due to to many error. Should I just continue this and when its done, change disk3 to the new drive? darwin-diagnostics-20221123-1430.zip
November 23, 20223 yr Community Expert Disk3 appears to be failing but since there's a single error let the rebuild continue for now, note that we don't recommend USB disks in the array/pools.
November 23, 20223 yr Author Thanks jorgeB for the reply, Is the rebuild working to get Disk5 back on from being emulated? I'm just waiting for my Define 7 xl to arrive (i should have not put the drive in the enclosure and not added to the array) there is nothing in that drive. I only pre-cleared it and added to the array) then a day after disk3 went fubar. should i pre-clear this new drive or just just replace disk3 when it's done rebuilding? Edited November 23, 20223 yr by DCWerick
November 23, 20223 yr Community Expert 1 hour ago, DCWerick said: I only pre-cleared it and added to the array) then a day after disk3 went fubar. Then why is it being rebuilt? Was it added as a new disk or used to upgrade a smaller disk? Also note that when you remove it from the enclosure the name is going to change so Unraid will report it missing.
November 23, 20223 yr Author Disk 5 (new) added to the array (so there should be nothing on it). Disk 3 failed 2 days ago and I shut it down until i just got the 12tb replacement today and when i boot the system up, tried to replace disk 3 but wont let me (due to many changes) that's why i posted here coz, i don't know what to do. So when the rebuild is done. Disk 5 (should show as "green")? then i can replace disk3 with the WD 12tb? then after that, remove the disk from the enclosure then rebuild disk 5 (again?)
November 23, 20223 yr Community Expert 1 hour ago, DCWerick said: Disk 5 (new) added to the array So why is it rebuilding?
November 23, 20223 yr Author I'm not sure. this is the 1st time (it happened) just fairly new on unraid, about a little over a month. should i just wait until it finish rebuild? and then replace faulty disk3?
November 27, 20223 yr Author its rebuilding now on disk 3. Not sure why disk5 was emulated. But when this disk3 is done. Still waiting for my new Case then i can remove it from the hdd enclosure. I think i can breath now lolz! will just keep this open until 100% rebuild is done. Thank you so much JorgeB!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.