Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cache Drive Unmountable: Wrong or No Filesystem - Help

Featured Replies

BTRFS error (device sdc1): parent transid verify failed on 430581235712 wanted 3932779 found 3932422

This error is fatal, it happens when there are lost writes, i.e. when the controller/device tells the OS all writes were complete when in fact they weren't, usually a device/controller firmware issue, also note that RAID controllers are not recommended and can cause this.

 

Best bet to recover the data is usually btrfs restore, option #2 here:

https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=543490

 

  • Author

I know theres no hardware raid, i just didnt setup unraid properly i dont think then or the server when i did this a couple years back, was working fine, So does this mean the Drive itself is toast? I was following step 1, which it mounted and backing up everything as we speak. Once i have a backup just wipe the drive? i had a hard power cutoff prior to this happening (Which i think was the cause of the issue)

2 minutes ago, nikkinrob said:

o does this mean the Drive itself is toast?

That's usually just a filesystem problem, not drive, but because of the controller cannot see SMART for the device.

  • Author

Once i have backed up the data, whats the easiest way to restore the cache drive back again with the backup to make things go back to normal. (I appreciate the help greatly.) simple MC command and re-write the data back? or anything special needed to be done?

13 minutes ago, nikkinrob said:

simple MC command and re-write the data back? or anything special needed to be done?

Basically that, make sure docker and VM services are disabled if used.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.