December 7, 20223 yr My parity disk is disabled as of this afternoon. I know there can be a lot of causes for disabled disks. I've tried some troubleshooting but still having issues. I've tried: Stopping array and removing disk from parity slot Starting Array Stopped again and re-adding (and removing the disk from historical devices) This allows a parity check to start, but the disk gets disabled after a few minutes I've also tried power cycling the server, but this didn't seem to make a difference Is this possible a cable/power issue, or is my drive dead? tower-diagnostics-20221206-2315.zip
December 7, 20223 yr Disk dropped offline so there's no SMART report, check/replace cables and post new diags.
December 7, 20223 yr Author 6 hours ago, JorgeB said: Disk dropped offline so there's no SMART report, check/replace cables and post new diags. tower-diagnostics-20221207-1044.zip Moved parity disk to an unassigned device (sdi) Edited December 7, 20223 yr by kage1414
December 7, 20223 yr Author 3 minutes ago, JorgeB said: Disk appears to be failing, you can run ane extended SMART test to confirm. tower-smart-20221207-1051 (1).zip Result was "Completed: Read Failure"
December 7, 20223 yr Solution If a drive cannot pass a SMART test without errors then it needs to be replaced.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.