Unraid 6.11.5
 
Motherboard: ASUS P8Z68-V PRO GEN3
- Initial graphics adapter is set to iGPU
- Legacy boot mode
 
PCI GPU: NVIDIA Quadro P400
- installing driver latest: v525.78.01 with nvidia-driver plugin
 
- intel_gpu_top is not installed.
- /boot/config/modprobe.d/i915.conf exists as an empty file to enable intel drivers as per these instructions
- I tried adding nomodeset to the boot append options
 
I've tried a number of other settings that I've now forgotten. All I'm getting is a black screen with a solid, not blinking, cursor in the top left corner.

I'm wanting unRAID on igpu leaving the p400 for jellyfin.
 
What else can I do? It works if I remove nvidia-plugin and prevent the driver from installing.

 

Edited March 20, 20233 yr by iarp
removal of diag file.

Setting disable_xconfig=true within /boot/config/plugins/nvidia-driver/settings.cfg solved this.

I have been trying to figure this out for so long and nothing would work. I just found this thread and this worked perfectly! Now I can see the GUI on the local monitor and through the iDrac on my server along with the normal web GUI. Thank you so much!

Oh. My. God.... It worked.

 

You have no idea how long I have been trying to solve this problem. 

 

THank you!!!!!!!

Thank you so much!

 

I have been trying to fix this problem ever since I updated to 6.12

Works for me too, thanks 👍 

Just changed MB/CPU/Ram and put back in HBA card.   In the previous build I was using a PCI Video card really old 2008, now using 1660 super as boot/transcoder & 3050 for a VM(have not set up yet).

 

Installed Nvidia driver but have not rebooted yet, doing preclears.

 

Is this fix only Intel iGPU?

 

So just a dash or underscore at top left of screen and rest blank.

 

 

Edited January 9, 20251 yr by Paul_Ber

I was using Nvidia cards and this worked for me.