March 20, 20233 yr so i have a pool 1 nvme m.2 ssd and 1 sata m.2 ssd. wanted to use nvme for its own pool for array speed up. so i shutdown installed another sata m.2, uninstalled the nvme booted unraid chose new drive to replace missing drive started array seamed to just be copying and taking new drive just fine other than the fact the pool was about 1.5 gb smaller than before drive swap. then a little later started to notice the pool filling and saw my log was at 5% mem use. took diagnostics shutdown reboot, went to start plex not containers would open giving me a 403 error code. took diagnostics again shutdown reboot this time containers opened but im still getting errors as i use plex. i attached the 1st set of diagnostics Edited March 21, 20233 yr by gmguy496 add attachment
March 20, 20233 yr Author after looking around it seams my docker img is showing in pool and disk 1 so could this be part of the problem?
March 20, 20233 yr Community Expert Please post the diagnostics that are downloaded as a single zip file. If you are not seeing this then you probably have your browser automatically opening that zip file and showing its contents. You will find that virtually nobody will bother to look at them when the contents are posted as separate files.
March 20, 20233 yr Community Expert Those diags are filled up with device errors, but since they end on the 19th not clear if they are still happening, please reboot and post new diags after array start.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.