CyberIntellience Posted March 22, 2023 Share Posted March 22, 2023 (edited) So i had a power outage last night. Turned on unraid box and tried to start array. It was trying to do a parity check but around 19% it started saying stale configuration. I decided to reboot using unraid GUI. I tried to start array again but got "stale configuration", didn't even bother with parity check. My unraid box is hooked up to a surge protector and power outage happened in the middle of the night, only minor background usage was going on from docker containers. It seems like docker containers are up, I can access some of them (the ones with web GUIs). What should I do? I did a quick search and saw that usually when this came up there were missing disks, I don't have that problem. Disks look fine in unraid (nothing shows up in red, no disks missing or out of order). In terms of errors the only ones I saw in system log are: - kernel: serial 0000:00:16.3: Couldn't register serial port f0e0, irq 19, type 0, error -28 - kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-330) Unraid version: 6.11.5 Edited March 22, 2023 by CyberIntellience Quote Link to comment
Solution JorgeB Posted March 22, 2023 Solution Share Posted March 22, 2023 If you are using Firefox reboot first then use a different browser. Quote Link to comment
CyberIntellience Posted March 22, 2023 Author Share Posted March 22, 2023 10 hours ago, JorgeB said: If you are using Firefox reboot first then use a different browser. This is the solution! I was using firefox as thats my main browser. This time I rebooted using firefox but logged in using Google Chrome. I was able to start array successfully. Now the question remains is why? Quote Link to comment
JorgeB Posted March 23, 2023 Share Posted March 23, 2023 It's a known issue with Firefox. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.