So i started getting this errors when iam trying add a new drives.  

 

Apr 15 11:23:28 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read
Apr 15 11:23:28 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read
Apr 15 11:23:28 Tower kernel: ldm_validate_partition_table(): Disk read failed.
Apr 15 11:23:28 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read
Apr 15 11:23:28 Tower kernel: md2: unable to read partition table
Apr 15 11:23:28 Tower kernel: md2: running, size: 7814026532 blocks
Apr 15 11:23:28 Tower  emhttpd: shcmd (424): udevadm settle
Apr 15 11:23:29 Tower  emhttpd: Opening encrypted volumes...
Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read
Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 0, async page read
Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 4, async page read
Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 8, async page read
Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 16, async page read
Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 32, async page read
Apr 15 11:23:29 Tower kernel: Buffer I/O error on dev md2, logical block 64, async page read

 

The drives iam trying to add are all new even run a s.m.a.r.t. extended test without any issues. and pre-clear also. But when adding to array i noticed this.   Even done a clean unraid install since kinda touth it was a issue there. but that wasnt it.  

 

What i have done so far:

Changed out the cables "sas mini to sata"

Changed out the sas controllers

Clean install off Unraid as stated above.

 

i have also replaced the cables "sas mini to sata" and the sas controllers.   

 

MB: Asus ROG STRIX B450-F GAMING

PSU:  Evga 650W GS2

Controllers: LSI 9210-8I in IT MODE

Atm i only have 4 drives connected  and 2 nvme``s. 

 

Anyone got any idea or tips on what can be the issue?  

 

PS: i do have the logs/diagnostic from before i did a clean unraid if thats wanted also. 

 

 

tower-diagnostics-20230415-2319.zip tower-syslog-20230415-2119.zip

here is also the diagnostic/syslog  from before the clean Unraid install.

thor-syslog-20230412-2117.zip thor-diagnostics-20230412-2317.zip

Those are normal for new array drives, just ignore, once they are added and formatted the errors will be gone.