Unraid 6.11.5 - Unassigned devices not loading in main

[Kansur]

My unassigned devices just recently stopped loading the info as seen in the screenshot of the main tab.  The loading animation just keeps going and never loads.  The drive does show up on the dashboard page though as seen in the second screenshot. I have tested this under Firefox and safari and it is the same in each. 

 

tower-diagnostics-20230520-1249.zip

Edited May 20, 2023 by Kansur
more info added

[dlandon]

You have issues with a remote share:

May 19 12:47:35 Tower  emhttpd: read SMART /dev/sdo
May 19 12:50:53 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close unmatched open for MID:1457021
May 19 12:52:07 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close unmatched open for MID:1475270
May 19 12:53:18 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close interrupted close
May 19 12:53:52 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close unmatched open for MID:1510647
May 19 12:55:05 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close interrupted close
May 19 12:55:08 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close cancelled mid failed rc:-9
May 19 12:56:08 Tower unassigned.devices: Warning: shell_exec(/bin/df '/mnt/remotes/PLEXINGTON_data' --output=size,used,avail | /bin/grep -v '1K-blocks' 2>/dev/null) took longer than 10s!
May 19 12:57:22 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close interrupted close
May 19 12:57:24 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close cancelled mid failed rc:-9
May 19 12:59:12 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close unmatched open for MID:1586268
May 19 12:59:46 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close interrupted close
May 19 12:59:47 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close cancelled mid failed rc:-9
May 19 13:01:32 Tower kernel: CIFS: VFS: \\PLEXINGTON\data Close unmatched open for MID:1626809

That shouldn't cause the constant Unraid wave, but that may be the cause.

 

I would do the following:

• Click on the double arrows icon in the upper right hand corner of the UD page and see if it comes back to life.
• Remove the /flash/config/plugins/unassigned.devices/samba_mount.cfg file.  This will remove all your remote share configurations.  You can add them back later.
• Try clicking on the double arrows icon and see if UD comes back to life.
• Reboot both servers.

[Kansur]

That fixed it. thanks.