ramair02 Posted June 25, 2023 Share Posted June 25, 2023 (edited) Diagnostics attached. Not sure what is up. I had a failed cache drive, shutdown the system to replace it, started the system again and got to the WebUI. Assigned the new cache drive and tried to start the array. Nothing was happening -- the start button was unresponsive. So I rebooted. Now, I cannot access the WebUI through localhost on the server itself nor through other devices on my local network. I also tried GUI safe mode, but still no WebGUI. The server seems to boot fine and I do have SSH access. Any help is greatly appreciated. tower-diagnostics-20230624-2100.zip Edited June 25, 2023 by ramair02 Quote Link to comment
ramair02 Posted June 25, 2023 Author Share Posted June 25, 2023 (edited) Perhaps related, but there is no network.cfg file on my flash drive in the config folder. I only have a network-extra.cfg file. I'm not sure how that would disappear, but maybe it is part of my issue? Edit: Upon further research, I don't believe this is related to the issue. It seems if you don't make changes to Network settings, there is no network.cfg and the system utilizes default settings. Edited June 25, 2023 by ramair02 Quote Link to comment
JorgeB Posted June 25, 2023 Share Posted June 25, 2023 I don't see nginx starting, what do you get if you type: /etc/rc.d/rc.nginx start Quote Link to comment
ramair02 Posted June 28, 2023 Author Share Posted June 28, 2023 On 6/25/2023 at 7:19 AM, JorgeB said: I don't see nginx starting, what do you get if you type: /etc/rc.d/rc.nginx start Shoot, I'm sorry Jorge -- I missed this. I was getting pretty frustrated and ultimately downgraded to 6.11.5 for now. Everything is working as intended again. Apologies that I didn't stick it out to test out why nginx was not starting. 1 Quote Link to comment
lavavex Posted July 1, 2023 Share Posted July 1, 2023 I’m having same issue on 6.12.2, running the command says Nginx is already started and stopping the service then starting again does not work. Let me know if anything else is needed. Quote Link to comment
lavavex Posted July 1, 2023 Share Posted July 1, 2023 1 minute ago, lavavex said: I’m having same issue on 6.12.2, running the command says Nginx is already started and stopping the service then starting again does not work. Let me know if anything else is needed. Quote Link to comment
CajunCoding Posted July 2, 2023 Share Posted July 2, 2023 @ramair02 did your Cache fail shortly after updating to 6.12??? Mine crashed within 1-2 days of updating... I fought instability for several days with dozens of re-boots, some not helping, others working for a few hours before my cache drive went back to read-only again (completely killing Docker). I also rolled back to 6.11.5, re-built my cache drives, and now appear to be very stable again. Quote Link to comment
lavavex Posted July 2, 2023 Share Posted July 2, 2023 12 hours ago, CajunCoding said: @ramair02 did your Cache fail shortly after updating to 6.12??? Mine crashed within 1-2 days of updating... I fought instability for several days with dozens of re-boots, some not helping, others working for a few hours before my cache drive went back to read-only again (completely killing Docker). I also rolled back to 6.11.5, re-built my cache drives, and now appear to be very stable again. No issue with cache dying, just some mover issues for me as well as no webgui still Quote Link to comment
ramair02 Posted July 5, 2023 Author Share Posted July 5, 2023 On 7/2/2023 at 12:26 AM, CajunCoding said: @ramair02 did your Cache fail shortly after updating to 6.12??? Mine crashed within 1-2 days of updating... I fought instability for several days with dozens of re-boots, some not helping, others working for a few hours before my cache drive went back to read-only again (completely killing Docker). I also rolled back to 6.11.5, re-built my cache drives, and now appear to be very stable again. Yes, my cache failed upon boot after upgrading to 6.12. I replaced the drive and rolled back to 6.11.5 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.